Glynn
-
Posts
241 -
Joined
-
Last visited
Content Type
Profiles
Forums
Blogs
Gallery
Calendar
Downloads
Everything posted by Glynn
-
I remember proudly showing my ex how I could set my helicopter blades up to 0.01 of a degree with my new Digital Inclinometer, next thing I knew I was re-hanging all the kitchen cupboards so the tins didn't all go to one end. Still got the Inclinometer.
-
Thanks for that chaps, but the praise should go to Richard who goes Above and Beyond the call of duty when it comes to producing these kits. The amount of time and miles he does astonishes me. So it's nice to have a little input to the cause. Those spinners are a work of Art.
-
Yep I got the payment thanks, I call it Trotters Independent Traders, I name a folder for each Decal but only use Initials
-
I have done Tall-In-The-Saddle but can do most of them as long as you have the Star's & Bar's from Richard
-
-
I haven't got a Box or Label and it's my aeroplane that's on the label.
-
Posted by Chris Walby on 11/11/2020 13:29:53: Hi, Hope you don't take this the wrong way, but IMHO I am not to sure if the nuts and screw head might cause point loading and possible stress failure over a period of time. Perhaps not too much of an issue if you check the screws every time you head to the flying field. Do the blades normally sit in a recessed back plate that supports the blade fixings Chris my prop shims or as Paul calls them "Posh Bits" helps, as the prop blade is flat this increases the contact area and spread the load , It's a flat channel with shoulders so the blade will locate nicely, in case you need to replace a blade I am supplying a spare so 5 in the pack. I will also be flying with these and am confident they will work just fine but you guy's will be using them at your own risk. I am sending Paul a set of Posh Bits so I hope he tries them. Edited By Glynn on 11/11/2020 14:32:29
-
Gary I have PM'd you
-
Right chaps I was beaten to it by Paul, who wasn't supposed to fit his "precious" spinner this quick. All those who ordered the spinner will receive Four prop shims to overcome the clearance fit. I will get your addresses from Richard and post them direct to you. Just place them under the root of the blades and it will raise the blade by 3mm. I was a bit overwhelmed with printing the cockpit kits but have caught up now.
-
-
Really fine looking Spitfire David, Well done Sir
-
And I thought it was so you didn't have to pay me copyright I'm not doing anymore walks of shame, I've worn out my boots doing all the other ones. Edited By Glynn on 06/11/2020 18:53:57
-
Last time the boy's did a "Video" Richard had a lot of explaining to do when the Vice squad turned up.
-
David Richard had already told about it, They have just been put in the postbox, enjoy
-
Yep I can do that, Get the Stars and bars from Richard and just let me know when you want the extra's
-
Peter, Yep I have the markings for the RAF, Australian, Free French and the Polish RAF.
-
-
Here are some alternate Sqd codes, I have Frankie and Paul has Berlin Express but have a look on the Interweb and if I can do it I will.
-
-
-
-
-
-
-
That really looks Great
