Jump to content
Please be aware of scammers when using the Sale/Wanted forum areas

Sebby

Members
 View Profile  See their activity

  • Posts

    12

  • Joined

  • Last visited

 Content Type 

Posts posted by Sebby

    9c Tx Fault

    in Futaba

    Posted

    Hi All, I cannot get my 9c to switch on! Was ok now nothing? When connected to wall charger and on/off switch on Tx cycled, charger responds by charging or not? The Tx has a new nimh which is fully charged and has been tested OK on my 7c, Any thoughts welcome.
    I contacted RIPMAX. they advised no Service Dept until after lockdo

    Which wood for where

    in Why Not Say Hello....

    Posted

    Up till now I have either flown ARTF, or 2nd hand planes where any repairs have necessitated like for like replacement. Now I want to build from plan where I need to order the wood based on what the plan shows me. Taking advice from this forum I note that there are many views on where soft, medium or hard balsa or birch or other wood should be located, but nothing definitive, is there such a guide anywhere, and do I need to ask the balsa supplier for specific types of balsa or other wood by ordering from where the wood it to be used, e.g spar, longer on, wing skin etc?

    Flair Junior 60

    in Building from Traditional Kits and Plans

    Posted

    Thanks to all for responses.

    I have now got a copy of KK plan and will create templates from the plans. With fresh eyes I will re-scour the Flair plan in case I’ve missed the rib sections. Another item missing from the kit is the Flair Instructions mentioned by brokenenglish, being a newbie I assumed the plan was all you got in the box🤔 So a copy would be welcomed if anyone has a copy.

    Hopefully in a couple e of days I will report back on progress.

    Flair Junior 60

    in Building from Traditional Kits and Plans

    Posted

    Thanks to all for responses.

    I have now got a copy of KK plan and will create templates from the plans. With fresh eyes I will re-scour the Flair plan in case I’ve missed the rib sections. Another item missing from the kit is the Flair Instructions mentioned by brokenenglish, being a newbie I assumed the plan was all you got in the box🤔 So a copy would be welcomed if anyone has a copy.

    Hopefully in a couple e of days I will report back on progress.

    Flair Junior 60

    in Building from Traditional Kits and Plans

    Posted

    I am building a flair J60 from a secondhand kit, just getting ready to build centre section and wings and find that the ribs in the box belong to a different plane! The flair J60 plan does not show the rib profiles. Does anyone have a copy of these profiles that can be uploaded to get me going? Thanks

    Selecting Servos for a New Model

    in All Things Model Flying

    Posted

    I have just bought a Seagull Zero. The kit is great, the manual detailed except it gives no clue as to what size, type etc servos are required for the flying surfaces, retracts and throttle. My model is 69” wingspan, 1.20 FS, weight around 4.75kg (9 1/2 lbs) and has mechanical retracts. The manual says 8 servos and the box 9! How do I choose the right servos. Apologies if a forum already exists for this topic, please repoint my enquiry to the right space, thanks

    Taranis x9d newbie

    in FrSky

    Posted

    i won an x9d tax in my local model club raffle. Being both a newbie flyer and only slightly pc literate I am bamboozled by the x9d and wondered if there is a library or model settings that I can download and use in my Tx to get me going. I have checked the firmware and this is ex factory version 1. My planes are Irvine tutor with IC engine, zagi 48inch with electric motor, ST Discovery, Multiplex Easystar And Funcub

×
×
  • Create New...