Scott McKie

HI Guys, For what it's worth, and it is based on two years of selling Depron based true scale profile kits with 40" w.s. all over the world; on our twin motored models we always specified that one ESC could be used with the following caveats. The motors needed to be two of the same make and model, and the ESC should have 15-25 % more amperage capability than the full power total of the two motors to be powered. I also, specified that the builder should, if at all possible, replace all power cables that came with the battery pack , the ESC, and especially with the motors; with a much larger thread number, silicon shielded power cable. When I specified thread number, I'm talking about the number of individual wires making up the cable, not larger diameter wire. We sold a scale P-38, a scale Grumman Tigercat, and were just testing out our scale P-61 Black Widow when we had to fold up shop due to one of the major participants moving out of the area. We never received a complaint, and never had a flight failure due to electronics problems. So, there it is. Draw from it what you will, but 2 motors on 1 ESC can and has been successfully done. Scott McKie - Gamma Star Models - USA