aerts michel
-
Posts
121 -
Joined
-
Last visited
Never
Content Type
Profiles
Forums
Blogs
Gallery
Calendar
Downloads
Everything posted by aerts michel
-
Hi still any flight report? 😉
-
Hi Craig I have done exactly the same as you for the battery tray😉
-
Hi Martin. Good luck for maiden flight. Do you power with 3s only? mine is also finished and I must still buy the 4s 5000 battery. No lead necessary.
-
Hi Martin, I don't remember something special about F11. The thing is when you will glue the formers against the 2 wing parts it is better to use white glue than cyano. I made the mistake to first glue all the formers against one wing side with cyano, and when I tried to join with the second wing some of the formers where not well aligned and I had to remove the glue on these formers (I broke some parts in the operation). So if you use white glue it will allow you to take your time to aligne everything well because the glue will dry slowly. Bad news for your fan 64mm.. I have bought from bangood 4 fms fans (the ones used on Tony's Concorde). Edited By aerts michel on 24/11/2019 18:59:25 Edited By aerts michel on 24/11/2019 18:59:55
-
-
Here is a view on my setup wich can help you. I ended with 9 mm wood parts instead of 10 mm because opening was too narrow.
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
I am using the retracts set sold by Tony.
-
Hi all, glad to hear I am not the only one to build Tony's Concorde. Here is a picture of my actual stage of building.
-
-
-
New- 2018 CONCORDE for 4x50mm EDF
aerts michel replied to Tony Nijhuis's topic in Tony Nijhuis plan builders
Excellent news. Lets wait september.
