heinkel
-
Posts
284 -
Joined
-
Last visited
Content Type
Profiles
Forums
Blogs
Gallery
Calendar
Downloads
Posts posted by heinkel
-
-
Where would i get a valve spring for a old Lazer 75 engine,thanks
-
Thanks for the info ,i had a set of electric retracts that lasted one landing ,will try the dolly ,cheers
-
Hi all ,quick question .Is it possible to make a take off dolly for A 90 Size Blackhorse P-40 as i have given up on the useless retracts,cheers .
-
Thanks everyone think I'll go with the savox ones ,cheers all .
-
Hi Jon ,the 148s won't fit ,have gone down the servo in each wing route !
-
Cheers folks ,yes they have to be about the same size ,disposed of old ones so looking for complete replacements ,thanks
-
Hi,looking for suggestions about suitable wing servos for my Flair Baronette ,have tried hitec HS 81s but they have failed ,thanks
-
Hi there
Managed to keep dihedral, though rods arn't as far into wings as wanted ,amount of dihedral restricting how far they would go.Will be easier to attatch wings separately keeping struts bolted to top wing permanently.Still needs resheeting around centre section and new covering all round.Cheers.
-
Hi Roger
I have been busy ,i sawed the wings top and bottom into three seperate pieces,the centre sections are then attached to the normal mounting points. I then made brown paper tubes formed around aluminium rods and glued them into all the wing sections .The rods are passed through the centre section then the wings are attached to them,hope this makes sense ,will post some pics shortly,cheers .
Hi Roger
-
Not sure about cutting fuz in half,just looking for the method of joining the made up wings to the central wing on the fuselage if that makes sense,
-
Hi all.I have had a flair brisfit for some time, flown once but major pain to rig.Looking to get some help trying to convert to a plug in wing configuration if at all possible ,many thanks
-
Thanks Terry, i found out that it they are 6ba ,cheers
-
Hi all ,could someone tell me the size of the bolts used on the flair bristolfighter kit ,they retain the fuselage and wing struts,cheers
-
Just been given a old bipablast model. Gonna do it up and get it flying after many years , anyone know the c of g , and it has a broken canopy any suggestions cheers !
-
Hi,a friend of mine's father bought a flasher 500ep kit with a radiolink T6HPE hand set. Sadly he died recently and they want to sell his model. They have asked me to find out what it is worth so they can move it on , It was never flown and comes in a metel case.It is about two years old.Many thanks.
-
What about p1 p2 and p3 in formula 1 instead of first second third etc.Also box box box instead of pit
-
Hi all, long time since last post .Have a set of lander 90 degree rotating retracts for my blackhorse p-40. One of these has broken and i am looking for a replacement if anyone has a one .Trying to avoid buying a new set .Cheers
-
Hi Geoff ,i have a Badger 200NH syphon airbrush i use i for spraying larger surfaces as the jar holds more paint than some gravity brushes not sure of prices ,i also have a Premiair G35 for fine work. All these work of a Sparmax-AC27 compressor.Try looking at Airbrushes .com hope this helps ,
Peter
-
Try windex window cleaner available from amazon or any other clear widow cleaner
-
-
Thanks everyone for the hints and tips.Ken, Weasel will be test pilot for the maiden as always, he's a goodin .
-
-
-
Hi all, busy building a Flair Baronette and about to start the covering. Looking for advise when it comes to the ailerons using the solartex as the hinge ,cheers.
Electric set up for beginners
in All Things Model Flying
Posted
Hi all ,busy building a Dancing Wings Storch ,total newcomer to electric .Motor suggested is a Turnigy SK3 3536 1050 but no info on speed controller or battery size any suggestions gratefully accepted.