Jose L. G.

Thanks, Sir. Patience and some sticks refused for over sanding the joint área...... Cheers. Jose Luis

I forgot, The cross over sticks are from the sheet that is made the front part of the fuse.

Well. I´ve been working of the fuse the past days. Now I have both sides made: Once dry the first I leave enought pins for placing the second over it. Put some wax paper over the cross over of the sticks and fixed with pins the front part of the fuse and built the second stick part. Before beginning the building I weighted the sticks of balsa, betwen 2.6 to 4.9 grams, Selected those abot 3.2 grams, (this weight is because there were a few around this weight). Tomorrow I´ll go to fly, so probably Little building in the class….. First side drying. Second side (Left) built over the right side.

Hi William, You are correct about the length of the tube. Once epoxy glued in their groove I`ll aply a fine fiberglass bandage over it and the balsa. This increase the gluing force of the part. Cheers. Jose Luis

I`m going to use pull-pull for the tail parts. As the original both elevators Will be linked with a tube (carbon in my case). Jose Luis

Top of the stab and elevators finished. This afternoom I`ll make the other. Cheers. Jose Luis.

When checking the plan and the 3 views I noted that there is a missing sub-rib near the tips, so I marked the cores to remember it.

Back to building after a few days of relax. Cut the longuerons from a shest of balsa with the balsa-stripper (Great Planes ítem). Mainly framed the leading Edge, tips and some ribs for delimiting the parts. Later added the red of the ribs.

Hi Danny. I've been Out, so no building also. Todas I've framed the stab and elevators. Still need to add a few parts. Cheers. Jos? Luis.

Chris. No problem. Always a few eyes are better than one pair.....

Hi Mart?n. Only ailerons on upper wing.Edited By Jose L. G. on 03/10/2018 12:03:07

Stab and elevators marked over the plan an the other side marked with setsquare (3D printed…..

Awaiting the glue to dry.

This morning I have cut the hole for the rigging wire on the fin. Marked the position of the ribs an repeated the process of gluing ribs in the other side. Drying until next day. I didn`t make the cut-outs for the hinges because I have decided on using robart hinges (Not originals these are from Great Planes), whwn profiled I`ll glue the reinforcing blocks before drilling their position.