Mike Hardy
Members-
Posts
477 -
Joined
-
Last visited
Never
Content Type
Profiles
Forums
Blogs
Gallery
Calendar
Downloads
Everything posted by Mike Hardy
-
All I would ask is that the one chosen from the next voting round (the winner) will be built by a 'master builder' early on so that any 'bugs' can be sorted before us lesser mortals have a go. My Tucano build had a lot of issues. Mike.
-
First Round Voting
Mike Hardy replied to Biggles' Elder Brother - Moderator's topic in The 2014 Mass Build
1) barnstormer 2) whizza -
2013 Mass Build - general chat thread
Mike Hardy replied to Martyn K's topic in The 2013 Tucano Mass Build
Thanks WF and Ken, I will try those products. I used Deluxe Materials 'glue and glaze' but they have told me to use 'RC modelers glue' instead. Hope one day to get this Tucano finished!! -
Anything that would help me complete my Tucano - I await with bated breath!! Mike.
-
Voting Chat Thread
Mike Hardy replied to Biggles' Elder Brother - Moderator's topic in The 2014 Mass Build
OMG this time again! Still building the Tucano!! I hope the next one chosen is allied to a few construction tutorials as well. I found the Tucano project a very large 'step up' for a novice, although a lot of help was to be had from this forum. Mike. -
2013 Mass Build - general chat thread
Mike Hardy replied to Martyn K's topic in The 2013 Tucano Mass Build
Ha Ha - are you fully booked for the end of the month!! -
2013 Mass Build - general chat thread
Mike Hardy replied to Martyn K's topic in The 2013 Tucano Mass Build
Hi Nige, No I did not!! although I did roughen up the balsa. Will try that thanks for the tip. what is the best way to remove the old adhesive? Regards, Mike. -
2013 Mass Build - general chat thread
Mike Hardy replied to Martyn K's topic in The 2013 Tucano Mass Build
Hi, My canopy glue joint has failed after a month (see previous post) the canopy was just sitting on the work bench under no stress. I am using Deluxe Materials 'glue and glaze' - any ideas as to what caused this failure? How should I remake the joint? Mike. -
Hi all, the plan shows the location for the 'peg' to locate the rubber motor but when the other end is fitted to the prop there is an 'interference' at former 9 lower edge!! This cannot be right!! how do I get around this? - move the peg location or cut a notch in former lower edge 9? Mike. Edited By Mike Hardy on 22/09/2013 00:13:44
-
Hi ascot, pocket money in the 50's - never went up with inflation (did we have inflation then?) Mike.
-
The KK MIG 15 was the only one that flew for me. But I remember the Jetex pellets were very expensive and i could not get many flights from my 2/6 per week pocket money!! Mike.
-
Hi, My kit came from Brankit.com, they do several re-pro kits and only cost £11. Vintage models is another. Mike.
-
Thanks Colin and Buster, Yep there are several kit suppliers reproducing KK and Vernon products. I am building this for my grand-kids, hope it flies. Mike.
-
Hi All, re my ME109 post - a clearer pic of former 10. Mike
-
Hi, I am building the fuselage and noticed former 10 is only anchored at one point! am i missing something here? I am sure somebody on here has built has built this kit in the past and can comment. Mike
-
2013 Mass Build - general chat thread
Mike Hardy replied to Martyn K's topic in The 2013 Tucano Mass Build
Hi all, I am having problems gluing the canopy to the cockpit especially around F5, I am using Deluxe materials 'glue and glaze' which when dry (2 hours) pulls away from parts of F5. Any tips? how do I make the canopy more flexible around F5 (heat)? The canopy is by Sarik. Mike. -
2013 Mass Build - general chat thread
Mike Hardy replied to Martyn K's topic in The 2013 Tucano Mass Build
Thanks BEB, having a few issues with the cockpit - the Vortex pilots are too tall for the Sarik canopy supplied by MHS so had to cut them down to fit. Why do I always get these probs Mmmm? So I am almost ready to glue the canopy on to the pilot assy. then I can finish the front end off The price you paid for the Balsacraft FW190 kit was low!! They go on Ebay for well over £100 if you can get one. It was a pity the people who bought Balsacraft did not continue with those kits - excellent quality. Mike. -
Hi, I have been using this site for years and had the some password - come to log in today and the site refused to accept my password. I have had to reset my password to get in. The new password is just a random set of letters which I will never remember!! Please, I would like to go back to my old password which I can remember. How do I do this? and why was my original password not accepted today? Answers please. Mike.
-
2013 Mass Build - general chat thread
Mike Hardy replied to Martyn K's topic in The 2013 Tucano Mass Build
Thanks BEB - and good luck with the FW190, I built the balsacraft Spit some years ago. Mike.