Jump to content
Please be aware of scammers when using the Sale/Wanted forum areas

Richard Savage

Members
 View Profile  See their activity

  • Posts

    13

  • Joined

  • Last visited

    Never

 Content Type 

Everything posted by Richard Savage

  1. Richard Savage
    me to
  2. Richard Savage
    Count me in.
  3. Richard Savage
    Put me in the hat.
  4. Richard Savage
    Count me in.
  5. Richard Savage
    count me in.
  6. Richard Savage
    Count me in.
  7. Richard Savage
    Thanks for the suggestions. Looks like I will be spending a few more hours locked away in the shed!
  8. Richard Savage
    Yes, it is a very exciting ride ! Maybe I need to transfer the powertrain to a different plane. Can you suggest a suitable model? Thanks
  9. Richard Savage
    link It is good that you have not built the wing yet because you can incorporate the extra esc wiring into the panel before joining. Props 7X4 Good Luck
  10. Richard Savage
    Since my original post I have fitted a pair of 1050kv motors and individual 30 amp speed controllers. The two motors and two speed controllers cost £35 in total from ebay. The motors are producing so much power that I have had to build ply boxes within the foam wings to contain them. I think that I have now reached the maximum performance that the wings can cope with. Maybe I need to look for a stronger model now!
  11. Richard Savage
    Thanks for the help. As with most things RC there is no definitive answer, but lots of good suggestions. As stated, it all depends on what sort of model I require as to what motor configuration I use. Plenty to do and experiment with. Once again, many thanks.
  12. Richard Savage
    Thanks for the prompt reply. Are the bell type motors as powerful as a 7.2 speed 400 brushed motor?
  13. Richard Savage
    I have been flying my twinstar on 11.1v lipo's with 7.2v speed 400 motors. The performance is good. As always, we demand more from our models and I was wondering if a switch to brushless motors would improve the performance even more and less destructive to the motors. Would I need two becs? Can I buy a replacement wing to avoid digging out the wing for the rewiring? What motors would you suggest? Thanks
×
×
  • Create New...