dave barrett

Hi paul.. It was a brand new charger charging new lipo battaries.. Charger has been sent back for a replacment

Hi paul.. It was a brand new charger charging new lipo battaries.. Charger has been sent back for a replacment

Hi olly. I checked the.setting was set.correctly 3 cell.2200 lipo end voltage 12.6 but.still went over. Spoke to supplier going to send. An ither out so hopefully have it soon. Cheers dave

Was using just using the charge program all the cells were above 4.2

Will contact airteck hobbies then.and let them know.

Its new dynamic 3cell 2200 battaries. It was charging over 4. 2 volts it was up at 4.4 volts

So even if it saying 4.2 volts per cell the battary has not reached full capacity. Is that what your saying so as it charging the voltage increase and then levels out to 4.2 it reached full is that correct. Sorry for all tge question new to electric flight so trying to get my head round it cheers dave

Just went to discharge battary and it was shown that each cell was below 4.2 volts as before was above when charging.

Charger it set for a 3 cell lipo and it charge above 4.2 volts so had to switch it off. Should I discharge to correct voltage

Hi have been charging my 2200 mah 3 cell battaries. But the charger does not cut of when its reached 12.6 volts. It set to cut of when it reaches 2200 mah. It still keeps charging when each cell has reached 4.2. Am I doing sonething wrong. Dave

Hi and thanks for your replys. Got everything connected up today working fine. Hopefull weather will be good tomorrow and it will be upto club for test flight..

Its a hitec optic 6. Yes prop is removed dont want to loose any fingers

Thanks for reply. Its a ripmax 40 amp esc. Dave

Hi ive built my wot.4 e and wanting to know if the esc regulats the lipo battary to the correct voltage for the reciever

Hi percy thats good to know.. Am awaiting the trusty wot 4 to be delivered