[Glue storage in winter]

Hi guys

where do you store your glue my hangar is my garage which gets quite cold this time of year,finding my glues are not very runny should I put them indoors.

[Aurora 9]

Guys I don’t know why I can’t find your replies but thanks again.

[Aurora 9]

Hi guys

update on my aurora 9 thanks for all your replies got a new battery from component shop,now works fine.thx again.

[Hitec repairs]

Thanks outrunner

[Hitec repairs]

Hi Ken

No I don’t know how old it is it was working fine I programmed my plane in but I’m not sure if I exited or just switched it of would that make a difference.

[Hitec repairs]

Right guys

with the charger plugged into the wall and into the tx there is no lights on the charger,but when I switch the tx on I get the flashing red light and when I turn it off I get the welcome screen come on then it dies there is 8.54 volts in battery don’t know why there’s no light on the charger although it has power coming out of it 

[Hitec repairs]

Keith

spoke to Mike says he’s not come across the problem but try a new battle 

[Hitec repairs]

Matty

manual says nothing

[Hitec repairs]

Hi Phil

rcme website

[Hitec repairs]

14 minutes ago, Nick Cripps said:

Have you charged the battery? The flashing red light may mean low battery voltage.

Hi Nick

no I haven’t changed the battery.

13 minutes ago, Nick Cripps said:

Have you charged the battery? The flashing red light may mean low battery voltage.

Hi Phil
Are they compatible with Hitec Rex’s that’s my problem I have about 20 Hitec optima Rex’s.

[Hitec repairs]

Hi Phil
Are they compatible with Hitec Rex’s that’s my problem I have about 20 Hitec optima Rex’s.

[Hitec repairs]

Thanks for the reply I only bought this a short while ago from the website as my FUTABA has gone up the wall thought I would use this when I switch it on the red light just flashes and sometimes when I switch it of the screen comes on.tried to do a video but won’t let me upload it.

[Hitec repairs]

Thanks for the reply I only bought this a short while ago from the website as my FUTABA has gone up the wall thought I would use this when I switch it on the red light just flashes and sometimes when I switch it of the screen comes on.tried to do a video but won’t let me upload it.

[Hitec repairs]

Hi folks

Does anyone do Hitec tx repairs.

[FUTABA 6exp]

Thanks Kev

I have another tranny which is 2.4 if it was an easy fix that would be fine.it’s just that I have a few models on that tranny spouse I’ll just have to fork out for a load of rx.

[FUTABA 6exp]

Also if I take the crystal out it shows 10.3 volts with the crystal in it shows 9.6 is that right.

[FUTABA 6exp]

Hi folks

my FUTABA 6exp won’t go into programming mode help.

[Battery fixing]

Thanks guys as ed says keeps coming unstuck from the wood ,so I will glue the tape in place.

[Battery fixing]

Thanks guys

[Battery fixing]

Hi folks

how do you folk fix your battery in I.c I have tried most brands of double sided tape to no avail they stick for a while but then become unstuck,any thoughts.

[Fuel line]

Ok thx

[Fuel line]

Hi folks how do I fill and drain my tank once the cowl is in place do I use this with the fill tube connected to one side and add a t piece to the carb feed line back to the other side.also any ideas how I can fix a silicone exhaust pipe to the exhaust on my os 52 as the exhaust pipe to attach it to is bery small.

 

[Os 48 f/s]

Thanks

[Os 48 f/s]

Hi folks I have acquired an os 48 f/s in a Cessna ag the nipple for the c/case breather is missing,does anyone know where I can get one or has anyone got one by any chance.

[Adhesive trim]

Hi chaps

refurbing one of my models where can I get the 3mm adhesive trim from.