Martyn Glover

Thanks for the hints and tips. I can now confirm that the fuselage is now 100% straight persistence pays off in the end !! just needed a slight trimming. Will post some pictures of it when completed

Hello people, I have started to build my uno-wot and have come across a little problem which I cant fathom ? After fitting the servo mounting tray and the last former, I cant seem to get the tail to line up perfectly with the three formers as instructions say to do. The fuselage is square have measured many times with a set square, But the tail end seems twisted slightly when holding ends together with elastic bands as instructions say! How do you get past this and glue ends accurately ? ANY IDEAS WOULD BE GREAT

Have found SC and ASP engines that have the remote needle valve on them, not badly priced either. Just got off the phone to a local r/c club regarding joining the club and learning to fly Spent about 30minutes going through things for me which was helpful. As predicted got the cold should from a couple of local clubs, who I shall not mention !!

Morning people Had a look at these threads, a lot of useful information for me to digest. I am still un decided about the size of engine to fit? I read on here that a guy put a 25 size in and felt under powered in a breeze, anyone had this issue also ? I like the OS engines that feature a remote needle valve to keep my pinkies away from the propeller, is there any other brand that have this system because I cant find any that do? Thank you for all the help and advice on here, I hope the model club that I choose are just as helpful as people on this site Anyone live in the Staffordshire area and know of a good club ? thanks for the links Geoff, your model looks fantastic.

I'm still along way from installing the engine stage but its good to get different opinions on this. Just been looking around and found an OS Max 35AX engine, a bit more expensive but I think its a happy medium ? Think your right about the trike undercarriage, got a lot to learn first.

Is there any options in the kit to make it into a trike ? It's been ordered

Thank you both for replying quickly I was looking at installing the OS46 but wasn't sure if it would have too much power for a beginner, the model has quite a wide range of engines it can take but you would think the smaller one would be for beginners up to the experience flyers. Looking at buying my Uno-Wot today I like the idear of building it so in the event of mishap I got some knowledge how to repair it! I'll put a picture on if all goes well ? thanks again

Hello all... i'm new to r/c models and just wanted to ask what is the best engine to put in a UNO-WOT 4CH TRAINER ? Read loads of articles but getting confused now. Any help on this will be much appreciated. Thanks Martyn