Neil Rothwell 1

John, Thanks f0r that will try them on the 5cells, savox on elevator so hope OK!

Putting servos in a schwing, KST 125MG in the wing (not HV) and Savox SH-255 for elevator and rudder. Both types of servos are rated at 6V with Savox saying they will take up to 6.7V load and 7.4V no load. Want to run these off a 5 cell 2/3AF pack so 6V nominal, but we all know it will be higher. Any experience on this set up or even running a 6.6v LiFe pack?

Very pleased with my Serafin and an Elf soon to be finished. I bought direct from Artur in Poland and price was very good and shipping was 20 euro for 2 models (hammer and elf). http://www.blejzyk.pl/en/price-list.html as I didn't know he had a new agent in the UK! Edited By Neil Rothwell 1 on 14/06/2018 13:59:47

Mark Very helpful thank you, from my measurement a 10% semi symetrical section. From other advise will try an RG15 and do what you have done with the elevons as the reflex. It does look lovely by the way, can't I tempt you out of retirement! Regards Neil

Want to build a Vulcan for slope with 2 brushless pushers for when not on the slope. Any ideas for a good slippy section for this and also balance point?