[DB Sport and Scale Auster J1 Autocrat]

Hi Danny on my laser 80 I ran breather pipe to front when tank is full it runs out you can connect apiece of temporary pipe and catch it in a pot. Also the air forced into pipe will cause a small vacuum in tank . Dave B.

[DB Sport and Scale Auster J1 Autocrat]

Hi Danny hope this helps. 

[DB Sport and Scale Auster J1 Autocrat]

52 minutes ago, Danny Fenton said:

David can you show how you have attached the vac-formed upper glazing, obviously removable on yours? Still puzzling over mine and dreading having to cut it.......

 

Cheers

Danny

on my top glazing the edge has a 5mm lip that fits into a groove cut into ribs and tucks under front glazing held by a small magnet and two small magnets at back, as hi Tec as that but works. power is a Laser 80 4 stroke. plane weighs about 9ibs approx. last flight ended with a tip stall when turning (pilot error) got away with just damage to cowling new one on order . will try harder next time.  

[DB Sport and Scale Auster J1 Autocrat]

[DB Sport and Scale Auster J1 Autocrat]

certainly makes mine look second rate.

[Farmhand 60.]

Anyone built the Farmhand 60" from Sarik Hobbies recently, and fitted a Laser engine. If so did you manage to get fuel tank at correct height to carb. Thanks Dave B. 

[Farmhand 60.]

Anyone built the Farmhand 60 recently from Sarik Hobbies. As Im about to start so any problems to look out for. Thanks Dave B.

[Farmhand size 60"]

ok thanks ill have to keep looking. 

[Farmhand size 60"]

Hi All, Has anyone bought a model from Sarik Hobbies called Rusty Ferguson crop duster size 65" or Farmhand 60". If so what ic engine did you fit in. As I have a Laser 80 going spare and was wondering if it could be fitted in either model and which would be the best of the two. Thanks Dave B.

[Spektrum AR 8020T Receiver]

Thanks all for help.

[Spektrum AR 8020T Receiver]

just updated from a Spektrum DX6i, to a NX8 with an AR8020T. Which seems a big jump. Can someone tell me what servo plugs go where on Receiver as only numbered. 1-8.  would need to use Au 1 etc  for setting -up Differential for Ailerons. Thanks. Dave B.     

[Farmhand size 60"]

Hi All, would like to build the Farmhand model size 60", from Sarik Hobbies. The IC Engines they recommend are Four Stroke 0.52- 0.90. If any one has built this model recently with an IC engine what engine did they fit. I have a spare Laser 80 wonder if this could be used. Thanks for any help appreciated.  

[Laser 80. Needs to be used.]

Thanks all for your comments, will have to have a big think.

[Laser 80. Needs to be used.]

Just finished building aDB Sport & Scale Auster. With a Laser 80 engine fitted. Still got a Laser 80 to use any suggestions of something easy to build or kit and easy to fly to use the Laser 80. Thanks Dave B. 

[Soldering.]

Iam about to solder my first Multiplex plug on a battery lead. What is the best solder to use leaded or with flux.

[Advent Prize Draw - 24th Dec - last one!]

go on then.

[Advent Prize Draw - 23rd Dec]

please please.

[Advent Prize Draw - 22nd Dec]

yes please.

[Advent Prize Draw - 20th Dec]

yes please.

[Advent Prize Draw - 18th Dec]

yes please Santa ive been a good boy so far.

[Advent Prize Draw - 17th Dec]

go on then.

[Advent Prize Draw - Dec 14th]

yes please.

[Advent Prize Draw - 10th Dec]

ill give it a go.

[Advent Prize Draw - 8th Dec (post to enter)]

yes please.

[Advent Prize Draw - 7th Dec (post to enter)]

yes please I've been a good boy.