Rob Blacknell 1

John, that figure is under each wig tip. I checked with a pal who has one & that is approx 4" under. Thanks John.

Ayup chums, building the Belair version of the "KK" Super Scorpion & am onto the wings. There's no info on the amount of dihedral needed. Anyone have a measurement of how much under each wing tip please? Thanks for looking.

No Grumps, not tried that. As far as it goes, Jon-Laser's way seems to be the best. It took a little figuring out as the sliders are not labelled like all the other switches. It was just a matter of selecting the correct switch/slider to channel 6 in my case. Got there in the end. Rob.

Well.........i did manage to get 3 position flaps using a 3 position switch, but i could only fine tune on flaps up & flaps all the way down. I know it can be done, 'cos i've done it once & it took me about 3 hours to figure it out, but i can't seem to duplicate the settings this time around. In the end, i settled for Jon-laser's method & even that took a little fiddling. Hey ho, thanks for your replies chaps. Rob.

No, i have no idea where to start.

Hi guys, trying to get flaps set up on a 3 position switch (E) on a Futaba 9c. stowed/take-off/landing. Manual not much help, any ideas?? Thanks for looking, Rob.

Posted by Chris Berry on 23/08/2019 13:37:24: I've just seen the latest update on the BMFA website. It seems registration is inevitable. I see there is an option to do the test in hard copy, posted out and then returned in hard copy. Although it delays the process in terms of knowing if you've passed and are successful in registering, maybe a hard copy is i the best way for all of us to do it? We are being law abiding and following the rules. It just means the powers that be have to issue the best part of 40'000 hard copies and process them all upon their return and then notify every individual if they have passed or not It would be good if we all did the hard copy, but sadly, I think most will do it via "the mobile", as it seems too much effort to put pen to paper these days.

Hi chaps, does anyone have a standard exhaust for an ASP 1.20 up fer grabs? Needed for a club trainer I'm trying to assemble. (T240). Thanks for looking.