Robert Heaney

Wow!That's fantastic. Thanks everyone for the information. I will try this and hopefully solve the issue. If I have any further problems I'll no doubt be back 😊 Thanks again everyone. To the skies.........

Thanks for the replies The esc I am using is the standard one which came with the glider. details are: VOLANTEX RC EASY RECIEVER, 30 AMP Brushless ESC, 2.45 LIPO 5-12 CELL NiCad/NIMH, EP-30 Battery Receiver I'm not sure if this one can be programmed. I actually brought a nice programmable one which I have yet to fit due to having to make up all the connections due to being supplied with bare ends. If that is the issue though I will make fitting it my next job and get it programmed. It just seemed weird that I had the Super Kinetic which was fine but this one appears to be flying with a tiny amount of throttle on even with throttle completely off. But I guess all panes are different? Thanks Again Rob

Hi Everyone, I'm relatively new to flying but have been flying electric gliders for a while and had a Super Kinetic 815mm sport glider which was great. I have gone from that to a Phoenix 1600 EPO glider. It is electric with a folding prop. It flies great but I have found that after checking controls and throttle on the ground, I launch it and then when flying around, I shut the throttle completely off but the prop still turns very slowly when obviously it should fold in. I don't believe its a binding issue as the prop doesn't turn when checking everything just before taking off. Or do I have that wrong? Does anyone have any ideas? Any help would be greatly received. Many Thanks Rob