Niall Reynolds
-
Posts
129 -
Joined
-
Last visited
Never
Niall Reynolds's Achievements
0
Reputation
-
Niall Reynolds joined the community
-
Guys again thanks for all the info. I do hope one of them letters does not find its way to me!!
-
Thanks guys for all the info. I assume I can adjust the carb to allow the inlet to be in the position you mention Pete?? I ran em today on nitro and they seemed fine.
-
I hear ya Denis. In fairness they weren't started in a long while and they are running very sweet!! I have the acrowot,xclaim and would models dago red mustang I picked up during the week for 25 pounds😁😁 Still on the lookout for more though!!
-
-
Evening guys, I have just been given 2 super tigre 45 from a friend. They are both running well as I tested em on the bench. Has anybody any details on them or are they any good. What models could I put them in??? I now have quite the collection of engines 2 super tigre 4, osla40, 2 os 55ax, Irvine 46 and a 53, asp fs70ar, Asp fs52ar. But only 3 aircraft so I'm looking for airframes for the rest.😁😁😁
-
-
-
The ones I have already are the Radiant Superpax.
-
So johns engine arrived today and the liner and piston are like new. Replaced all and the engine is running like a champ. Thanks again John and the forum, a great place with a great bunch of guys to call on for advice!!
-
-
Would a bmax charger charge them stephen
-
I have had issues running spektrum gear on 4.8 bolts so I have all 6v now. All standard s3003 or f148 servos.
-
Guys, What rx batteries are ye using? I am currently on 2000mah Nimh but am considering changing.. All nitro models and speccy gear
-
Might give the tapping out at 3.5 a go and see what happens
-
On a side note guys, I have a Irvine 53 with 3 bolt holes for the head with the threads damaged. Any suggestions on how to approach fixing this. I was thinking helicoils
