[Moon Dancer 2]

hi charlie.

i will be watching this one with interest.

those parts look very neat,

dan

[DB Hurricane paint and finish.]

looking very nice jon. you cannot beat a nice scale hurricane

my favourite warbird of all time. i reckon once in the air it will look fantastic!

dan

[Cambrian ME109 Funfighter electric build]

Id go for the top one for something different.

Dan

[Cambrian ME109 Funfighter electric build]

Hi martin.

That looks really good.

I Have followed your build from the start which now seems like it has gone really quick.

Im looking forward to seeing the end result

Good luck with the tissue and dope I would offer some advice but I havent done that before either I have only ever used iron on film from hobbyking.

Dan

[Do you remove your lipo from your transmitter every time?.]

I also keep my lipo in my dx6 fully charged doesnt seem to do any harm that way as said above its always ready to go.

Dan

[Cambrian ME109 Funfighter electric build]

Looking good...

I wondered earlier what the green and purple stuff was in by the control rods. I see it is to stop the epoxy getting in there and gluing them up solid..

Have you decided how your going to finish it.... Paint or film?

[Cambrian ME109 Funfighter electric build]

Good to see this build back.

Dan

[Your experience of Banggood delivery time?]

Quick update..

Well to my plessant surprise my order arrived today after posting on here yesterday.

I had to wait roughly 4 weeks but all is good with the goods

The packaging is open! But nothing missing my next order I will make sure it wont matter to much when it arrives

[Your experience of Banggood delivery time?]

Hi allan.

I have the same situation I ordered my 1st item from there the middle of november and still have not received it. My guess is the time of year? Not to impressed to be honest.

Dan

[Stampe SR7 building blog]

Very nice peter I like that.

Dan

[Cambrian ME109 Funfighter electric build]

Hi martin.

Hows the build going any updates.

Cheers

Dan

[SE5a - dogfight double]

Looking good df. I take it the axle is soldered to that frame? Maiden cant be far off now.

[Cambrian ME109 Funfighter electric build]

I'm enjoying seeing this build As well.

The battle britain scheme sounds good!

[Cambrian ME109 Funfighter electric build]

Thankyou jim.

Very nice

[Cambrian ME109 Funfighter electric build]

Hi martin

Following with interest.

What do you hope the auw might be.

Dan

[Take off dolly for a Funfighter, anyone used one?]

Posted by martin collins 1 on 13/08/2019 21:41:23:

I`m building a Cambrian ME 109, build thread will be started tomorrow with full spec etc. Once done i am going to do a Cambria KI61 Hein. I already have a Cambria Spitfire uo and ready to fly which someone else built, it is on 4s and a Sunnysky X2814 35MM 1250 kv motor on an 8x8 prop, it should go like the clappers on that set up. I also have a very old Cambrian P51 which i am converting to electric as we speak.......

thanks martin. i will look forward to seeing and reading your build thread as im sure it will help me with my build,

cheers

dan

[Take off dolly for a Funfighter, anyone used one?]

Hi martin.

What funfighter are you building. Have you chose a setup?

I am going to order one myself this week. Im going with the cambrian hurricane ( electric ). I have a turnigy 3536 1450kv to use in mine with a 9"or 10" prop not sure if to go 3 or 4 cell at the moment all depends on cg.

Dan

[SE5a - dogfight double]

hi dadflyer

have sent you a pm.

Dan

[SE5a - dogfight double]

hi dad flyer,

i have just come across this thread and i have enjoyed what i have seen and read so far. it is looking like a nice little build im sure the finished plane will look great!

thanks

dan

[SLEC Electric FunFly]

Very nice!

[SLEC Electric FunFly]

Posted by Richard Ashworth on 17/07/2019 21:46:58:

Hi Daniel

I have to say it was a 50/50 decision between buying a jig or “risking it”! The “risking it” won as storage of the jig would have been a problem afterwards and I did a more difficult fuz ok sans jig last year.

I spent time on getting the central formers and servo tray in and square and checking that the rears of both fuz sides met both in length and horizontally. I also used a long steel rule as a check.

Thats a great answer thankyou. I do have a slec fuz jig but was interested in how you went about it as one of these is on my list to build. I Look forward to seeing it finished.

[SLEC Electric FunFly]

Hi richard.

Looking good so far. A quick question about the fuse if you dont mind answering. because of the slot and tab design you do not need to use a fuselage building jig to get a straight fuse.

Cheers

Dan

[Warbird Replica Spitfire MKix]

What a beaut ! That will look amazing in the air.good luck on the test flight

Dan

[Funfighter thread, Cambria & Cambrian only, discussion & pics]

hi martin.

thankyou for the quick reply. if i build one [ i will ] it would be a brushless setup as my club are an all electric club, i think i would have to build a hurricane as it is my favourite warbird. if you could do a build blog on here that would be great. i have 5 traditional builds under my belt all with built up wings etc...hmm 838 watts on 3lb plane should be fun! its gonna get small fairly quick i imagine.

[Funfighter thread, Cambria & Cambrian only, discussion & pics]

nice models! i have always wanted to build one of these. how much experience in building would one need to be able to put one of these together?

dan