Jump to content
Please be aware of scammers when using the Sale/Wanted forum areas

Greg Minden

Members
 View Profile  See their activity

  • Posts

    90

  • Joined

  • Last visited

    Never

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

Greg Minden's Achievements

0

Reputation

  1. Greg Minden
    Greg Minden joined the community
  2. Greg Minden
    coming along nicely
  3. Greg Minden
    patrick. you will find an "Albums" tab at the top. You have to create an album of your pics - then you can add them to your post. G.
  4. Greg Minden
    great work!
  5. Greg Minden
    i can't remember if you said you measured your wingspan? Ours have all come out to 83"
  6. Greg Minden
    very impressive! I love your finish. I used the CG as per the plan and it worked out fine.
  7. Greg Minden
    looks good!
  8. Greg Minden
    Time to get after it Craig! People are waiting
  9. Greg Minden
    loving it!
  10. Greg Minden
    OOps - i see in your previous post that you are using 120A ESCs. Sorry for the confusion. But, easier hookup with the "Y" harness
  11. Greg Minden
    Peter - the usual way to achieve multiple hookup is to use a "y" harness easily available from H King and many sources for less than $10. I will point out that my motors each draw close to 100A at full power on 10s so you might want to rethink your Turnigy 60. I am using Castle 120HV.
  12. Greg Minden
    doing a fine job. Did you mention what you are using for power. I am running 10s on each side and i found that i needed to put the 6s packs fully aft and the 4 s packs fwd to balance. Mine turned out a bit nose heavy. That's with the receiver and one 6 cell rcvr battery aft and one 6 cell receiver battery and the gyro fwd. I think i've got about 40 ft of wiring in mine!
  13. Greg Minden
    Martin - I don't know who you were asking but i am using Jet Fan 90s with HET motors on 10s. (9 blade)
  14. Greg Minden
    I too had to do it like Craig said - in pieces. The other way just wouldn't work for me. That done - i kept looking at those flat "air dams" next to the fans and, well you know the rest. Probably uneeded.
  15. Greg Minden
    Looking good. I became worried that the flat bulkhead next to the fan intake would reduce efficiency and power so decided to fair in the inlets to the fan. Seemed like a good idea and my thrust measurements would agree
  16. Greg Minden

    Greg Minden posted a gallery image in Member Albums

×
×
  • Create New...