Posted by John Lee on 21/10/2020 13:57:42:
The only way I have found to do this is to assign a spare unused channel to the throttle cut switch, say in your case, Aux 4 to switch A. The switch then has two functions, Throttle Cut & Aux 4.
Then in the Warnings Menu assign a warning to Chan:Aux 4 Under 0%
That does it for me, the system will then not start up unless the switch is in the Throttle Cut position & you get an audible warning, just like when you switch on with the throttle open.
It works even if you are using, say, a 4 channel Rx that does not have Aux 4.
Edited By John Lee on 21/10/2020 14:02:53
Well done John. The answer from Spektrum Tech support....
Dear Bill,
On the Warning screen, change Chan to an open Aux port, and then go to Channel Input Config screen and set your choice of switch to the same Aux port.
Sincerely,
Chris W.
Product Support Team