Jump to content
Please be aware of scammers when using the Sale/Wanted forum areas

tony oneill 1

Members
 View Profile  See their activity

  • Posts

    118

  • Joined

  • Last visited

    Never

 Content Type 

Everything posted by tony oneill 1

  1. tony oneill 1
    Last pics till the weekend lol. A view of the tail, still to be completed by trimming the longerons to fit the tail when i make it. Also a view of the front. Built this up and fitted all stringers. This has went together really quickly, i have enjoyed building this part its good to work with larger pieces that fit really well.
  2. tony oneill 1

    tony oneill 1 posted a gallery image in Member Albums

  3. tony oneill 1

    tony oneill 1 posted a gallery image in Member Albums

  4. tony oneill 1
    Hi chris, on the rear of the fuselage i followed the build log. I only put in the vertical spacer at former 6 before i joined the sides with the firewall and all formers to F4. As i dont have a building jig i clamped the front and pulled the rear together with a clamp and no glue. I used a 6mm stringer down the slots in the top of the formers to check the alignment to the tail. When i was happy i glued the very end and then fitted the triangular 6mm parts. The rest of the formers fitted exactly in place then the diagonals were fitted. Hope thats not too long lol.
  5. tony oneill 1
    this is progress so far on the fuselage. got both sides together and starting to fill in bits and pieces. as i am going for electric power i put in a motor mount consisting of 4 pieces of M4 threaded rod and nylock nuts. these have turned out stiffer than i expected but if the torque of the motor with a prop on looks like moving it i will add in a stiffener.
  6. tony oneill 1
    this is the instrument panel i made. the article in the rcme and experience of scale models helped. first i painted the inside of the holes silver and then the outside black. i downloaded the harvard instruments and resized them to fit behind the holes. next a thin piece of plastic was glued on the back of the panel using pva and allowed to dry. the instruments i wanted were then cut out with an overlap and glued in place. the lights are pin heads trimmed and stuck on. then the black paint was touched up. hope i'm not teaching my granny to suck eggs as the saying goes!
  7. tony oneill 1
    this is where i started, not a great picture but laid the parts on the plan and started sticking them together. it all seemed to fit well over the drawing and i followed it to ensure the alignment was ok
  8. tony oneill 1
    first post to get started. began the build on 2/3/19 with the fuselage. no real problems although i was not 100% on matching the parts kit to the plan. soon got it resolved though and started putting it together.
  9. tony oneill 1
    Did a bit on the fuselage over the last few days. No real issues apart from re sizing the doublers at the very front in the engine bay.
  10. tony oneill 1

    tony oneill 1 posted a gallery image in Member Albums

  11. tony oneill 1

    tony oneill 1 posted a gallery image in Member Albums

  12. tony oneill 1

    tony oneill 1 posted a gallery image in Member Albums

  13. tony oneill 1
    Posted by Low pass Pete on 04/03/2019 19:13:06: That looks great Tony. Can I send you my panel for finishing please Are those Pin Heads perchance? Cheers Peter Thanks peter, well spotted they are pinheads. The rest is the harvard instrument panel download from this site amd resised with the printer to fit behind the holes. There is also a thin sheet of plastic to give the impression of glass. Doesn't show in the picture though
  14. tony oneill 1
    Decided to do the instruments before i glued it on place
  15. tony oneill 1

    tony oneill 1 posted a gallery image in Member Albums

  16. tony oneill 1
    Hi, I think someone may have replied to this but they are top and bottom of the tail seat where the fuselage joins at the tailplaine. There is also a thin piece of ply that provides a support for the tail wheel. Posted by Low pass Pete on 04/03/2019 07:30:56: Hi all Does anyone have any idea where this part fits? (6mm Triangular 2 off).
  17. tony oneill 1
    Hi all, made a start on mine, not a great picture though. Going for electric power. Tony.
  18. tony oneill 1

    Extended clamp

    tony oneill 1 posted a gallery image in Member Albums

    Extended clamp
×
×
  • Create New...