Simone Perfetti
-
Posts
14 -
Joined
-
Last visited
Never
Simone Perfetti's Achievements
0
Reputation
-
Thanks Steve, interesting, I' m making my model tailless too
-
Thank you! I hope to finish it during this winter
-
I would show my current project, Edf Eagle. I'm building an eagle with balsa and plywood to create the molds with fiberglass/epoxy to make the model with a plywood/ composite structure with an edf inside the fuselage, The idea is to make a model with a wingspan of 120-130 cm with divided wings for an easy transport and less than 900grams of weight to achieve good gliding performance with the motor turned off and the possibility of aerobatic flight and recover altitude with the edf turned on. I will install an air inlet that opens when the edf is running and closes when the edf is off to reduce the air resistance during the gliding flight, Currently I'm modifyng the wings and tail to be more realistic and gives to the model more yaw stability
-
-
-
-
-
Simone Perfetti joined the community
-
Thanks Steve, I will do soon thanks Kevin, those are great scale model ! Hi Jd8, Danny ,thank you! Buongiorno Josip! e grazie del benvenuto!
-
Thanks Steve, I will do soon thanks Kevin, those are great scale model ! Hi Jd8, Danny ,thank you! Buongiorno Josip! e grazie del benvenuto!
-
Thank you guys!
-
Hello, I solved a similar problem by applyng a small diameter spring to apply tension to the wire , when the wire is hot the elongation was around 7-10mm on 800mm of total lenght, I used a pull spring of 5 mm diameter, 40mm long, hope could be helpful for you
-
Welcome Will, It was the same for me , when I started this hobby , late'90 it was very difficult for me ,I believe that actually many models and equipment are much more affordable than in past, I hope you'll enjoy this amazing hobby
-
Hello, It's never too late to improve ourselves
-
Hello to all the members of the forum, I'm Simon from Italy, I started this hobby many years ago and actually I like to build my own projects , good fly to everybody!
