MikeyMikeMike

Thanks KC I will check,

hi guys, My AR6210 arrived and it paired almost before I got it out of the wrapper so thank you all for your help. I type this with tears of joy running down my cheeks. Thank you and goodnight.

Hiya, yeah I see the DSMX on the trans. I didnt spot that and it was staring right at me! I guess that must be it. I'll get a DSMX reciever. Thanks all! p.s the set up didnt have a modulation setting. the last in the list were contrast/ copy-reset and lastly - adjust left. I guess I wasted my money on the AR, anyone want them for £10 each? I have 2...

Since I made the video I have adjusted the throttle and taken the spring out so the throttle doesnt spring back. I have tried it with the throttle low (down) and same results.

well thank you all for the help. Outrunner - I dont release the trainer at all - on the vids Ive seen you dont release till the lights go steady on the ar and satalite. and they dont go steady they just go off and stay off. I have checked and the trans actually has DSM2 written on it so i can assume its DSM2 and the AR is DSM2. is it safe to assume if its written on it DSM2 that it is ? Denis - I am not sure about Mode - you could be right - but what mode do u mean ? Mode as in wrong vehicle selected or is there another mode? Thanks again all! Mike(y) WIN_20230302_10_10_15_Pro.mp4

Hi People, I'm new so don;t be mean! I have a problem I'm really struggling to solve. I hppe you wise people will be able to point me in the right direction. I have an AR6200 and a DX6i - both are DSM2 - they say so on the devices. Binding plug in and power supply attached to the controller (7.4v). The lights flash on the AR6200 and satalite. I have taken the spring out the throttle on the DX6i so I can have it stay low. All other buttons/levers are on 0 on the DX6i. I turn the DX6i on with trainer held The lights flash faster on both the satalite and ar6200 but then one by one the lights go out on the satalite and ar6200 and they dont come back on at all for at least 30 seconds. I am still holding the trainer up in the meanwhile. I have tried it about 10ft away too. I have also tried another ar6200 but the same issue. This leads me to believe its the DX6i - what could be wrong and how can I fix it? Thank you in advance. Mike