vtrkid1975

Hi all, figured it out that not to worry about red bind light as the instructions are wrong. There from an earlier version that used the gyro as a receiver. As this model has the additional receiver you ignore the gyro light saying it's not connected. Also it's supposed to be programmed from the factory but I found the gyros rudder/ tails rotor settings was reversed and had to reprogram. Another thing was the gyros roll rate and gain standard settings was the wrong way round on the dials giving it roll rate nearly max which made it so twitchy it was a joke. Read and double then triple read the full build manual that you can download to get it setup correctly. Now getting full 5 mins flight time instead of seconds before crashing. Hint get some spare front drive tail rotor gears as they strip at any tail rotor impact plus get the 470l skids as they raise the tails around 50mm so no tail blade strikes any more

Help, my align t rex 450lp artf with there A10 tx. The micro GRS status is green( heading lock on) but every time I connect the battery the bind light is solid red saying no signal from tx. Tried re bindng tx to Rx but that's the only thing to do for the A10 tx so manual says. Checked all plugs in GRS and Rx all ok. Swash plate doesn't move if you lift the tail or roll sideways. Have I got a brand new out the box koed gyro? Any advice would be great