Hi...Ive just finished building the Wot 4 RTF.....Very nice model to build and a reasonable colour instruction manual. Couple of issues I found with the build
1, wheel bolts are not the best ive seen because the bolt is not threaded all the way and the shoulder is too long leaving the wheels to flop about a bit so i changed it to a M4 bolt and was able to tighten the bolt to the leg.
2,The threaded bar which goes through the rudder for the close loop system is very small indeed and could have done with a more substantial one as i think in time its going to wear a hole and become loose.
3, Instruction manual although good quality was not very clear on a couple of issue (I.E) when measuring where to put the engine it doesnt actualy show you in detail where to measure from, Most of us would automaticaly know but to a new to the hobby person may not know and struggle slightly with this.
4 Only a small gripe...once you join the wing I think a small piece of white sticky back covering would have been nice to cover where the join is just to finish it off nicely.
All these issues are small and not that important realy but as ive built one I thought its worth mentioning,
On a scale of 10 i would give it 8-9 out of 10 its very pretty and I stuck a ASP 61 on the nose and still got it to balance without added weight.
Nice model ,nice to build and lets hope it flies as well as it looks.