[Solder help?]

Hi,

 

I am totally new to elecs, i went out to a local diy store and picked up some solder its called Go Gas lead-free Resin Core Solder now am i right in thinking after reading a couple of threads that this is probably the wrong stuff to use?

Advice would be appreciated....

 

Thanks

 

[Engine Mount Clamp]

Hi,

Thanks for all advice.

 

[Engine Mount Clamp]

Thanks,

Here is an image of said engine mount.

http://www.jperkinsdistribution.co.uk/detail.php?JPNO=5508173&activepage=1&Navmain=Accessories&subcatname=Engine%20mounts

Anyone else used one/not used one?

 

[Engine Mount Clamp]

Hi,

I have recently purchased a Top Gun Javelin 2,  it its supplied with a metal engine mount & a two clamp bars, it tells you to use nut & bolt to clamp down the engine, so you don't actually put the screws in the engine holes. I have never seen this before, normally i just bolt the engine down with screws & nyloc nuts. Has anyone come across this? Its it ok/or should i purchased a different mount?

Thanks

Anthony

 

[Great Planes Tracer]

Hello All, I have recently been given a Great Planes Tracer - Still boxed from about 1997? Has anyone had experience of this said model, i am currently flying a speed air and was wondering if this would be a good step up? Any feedback would be appreciated. Thanks

[The November Grand Prize Draw]

Well, there is no harm in trying.......

[The October Grand Prize Draw]

Yes Please!!!

[Win a brushless motor and ESC]

Yes Please

[Servo Buzz on Speed Air]

Hi they are futaba s3003 servos, They didnt buzz in my other plane, i adjusted the aileron control rods and managed to stop that servo buzzing, but i still have the other three buzzing, i have adjusted the rods and moving the servo arm but i hadn't thought of moving the servo higher... don't know if this is pratical in the speed air, but will have a look tonight. So does the buzzing damage the servos or is it just draining the battery quicker?? Thanks

[Servo Buzz on Speed Air]

Hi Eric Thanks, Its fitted with servo arms not discs, and the rod is slipping out of the servo arm, however and just has a thought of putting a z bend on the wire this would then stop it slipping and there would be no need for the clips.

[Servo Buzz on Speed Air]

Hello All, I understand that the buzz from the servo is because of friction from the control rods. I am just setting up a Blackhorse Speed Air...The control rods are already installed just need to be cut to size and connected. The instructions say to bend the control rod a feed through the servo and then use those plastic clips to hold the rods in place. Now this is my problem, when the clips aren't on there is no servo buzz but the rods slip out of the servo arm when a put the clips on the buzzing starts...Has anyone any ideas to how i can get this to stop? All help would be appreciated Thanks

[The September Grand Prize Draw]

Maybe this time............

[Seagull 40]

Well from that response i can assume that the Seagull 40, isn't that good.  I have purchased a Bhorse Speed Air.

[Seagull 40]

Hi, I was wondering if anyone has any experience of the Seagull 40? I am looking for my first low wing i have my A cert, i know there is loads of threads on here already about 1st low wing and that the Travel/speed/?? airs from blackhorse all have good reviews, Just wondered about the seagull? Thanks

[Dealers-Good/Bad]

I just wanted to add that on Thursday night i ordered a charge from Model Shop Leeds online. It stated 2 to 5 working days for delivery, it arrived on saturday. Excellent service and very reasonable delivery charge.

[Pro-Peak Prodigy 2 Advice??]

Hello All,

 I have just purchased A Prodigy 2 charger and there are no charge leads in the box, do i have to purchase these seperatly or make them? At the moment i am only going to use it for NiCd & Nimh.

Any info would be much appreciated?

 Thanks

[The August Grand Prize Draw]

Add me please!!

[A competition for forum users]

Yes Please!!!!

[Methane shortage?]

I couldn't comment on electric as i only fly i.c, however i would like to start flying electric, but cant afford anymore models, batteries and chargers!!! However i was speaking to someone in my local shop and he just pointed out that if your using 5% then only 5% is methane anyway so the increase will be on the 5%. But everything is going up...............but that is a different thread.

[Methane shortage?]

Hello, A month ago i bought a gallon of Formula Irvine 5% @ £13.50, today it cost me £16.00!!!! Maybe electric is the way forward???????

[A little competition for forum users]

yes please

[The July Grand Prize Draw]

Maybe this time please!!!

[The June Grand Prize Draw]

Please put my name in!!

[First Plan Build Any Ideas??]

Hello All, I would like suggestions on an easy to build first model from plan? I have some building experience from building an ARTF and also helping my dad when i was younger, but i would like to build something from plan and would like to hear suggestions of what you all think maybe a good first plan build? IC OR Motor i dont mind. I do like the look of the funterceptor in this month's mag but not sure how difficult? Thanks Anthony

[Early May bank hol weekend]

Hello, I am hoping to get some flying in this weekend. Haven't been able to fly for a couple of weeks due to weather & instructor not around. I have had ten flights (approx 15mins each) since starting to fly, Last three flights a took off myself so it was exciting/scary at the sametime. So now hoping to get some landings under my belt, but its annoying with the weather and not being able to get regular lessons!!