Peter Ashmore

  Ok ,so why not me .cheers .I could do with a bit of motivation.

  Why not me someone has to win.thanks in anticipation .{;-)

    Add me to the list .but at the top .

 Always has been my favourite aircraft /I have built them from 26" rubber powered 53"rubber powed .And 72" r/c . This would make up a set .Great!!

I thought i had put this info on before.i am looking for the location for a 6x2four bladed prop the type that cyril uses on his walrus.My friend cannot find one in the midlands Perhaps cyril would be kind enough to mail me with the info. Well wrinkly i have done it all started with rubber progressed onto power  f/f,did pretty well with that Started r/c with single chanel and flew aerobatics with that .All of my own designs are mocking bird .(well they do)Tried r/c slope /And flat field soaring got the certificated for that .flew radio aerobatics successfullywinning or placing in many contests .Then R/C class two scale.contest winner again Flew many shows including some in europeFlew indotr rubber co2 and electric for fun .also ran indoor meetings .Unfortunately poor support and physical health problems called halt to that .now because i cannot run after the models,modifying more small vintage jobs to r/c.Also attend as many meetings as pos at Wallop and Old Warden with Sam 35 and 1066.Wonderful company.I strongly recommend that more people try that .I am still very keen. If tony thomas Picks up my E-mail I will correspond directly for bending depron very succesfully .

My friend is building the walrus and it is well on the way to completion .however he is having trouble soucing the recommended 6x2 four bladed prop .could you oblige to me via this source  or send a E-mail and i will pass on the info .Cheers ,  Bending depron .We cut and curve two sheets of aluminium bigger than any wing which we are likely to build .Sandwich the foam bewtween the ali sheets hold all together with bulldog clips .Then heat the lot with a heat gun.Both sides until it to hot to hold .That is enough .you do not want to cook the foam.cool it under a cold tap and hey presto Curved wings .Easy peasy.