Louis Benjamin
-
Posts
75 -
Joined
-
Last visited
Never
Louis Benjamin's Achievements
0
Reputation
-
Louis Benjamin joined the community
-
-
-
-
My radio gear is just over a year old, maybe it`s a faulty one then.
-
Well it`s worked anyway thanks Phil. My local model shop told me not to attempt it and send it off for service. I think that`s all they would have done anyway. louisben
-
Cheers Phil, I did as you said and it`s worked, thankyou louisben
-
hi, i seem to have a problem with my radio gear. I noticed that when applying full right aileron, the ailerons flick back to a neutral position.I can gradually increase movement from side to side and have control but not when stick is on full right. I tried another receiver. servo`s etc.... but to no effect. H ave i a transmitter problem? louisben
-
Hi, I have a couple of li-po`s that have 1 damaged cell in each pack. I wondered if i could replace the bad cell in 1 pack with one of the other cells to make a complete pack?........Oh, and how easy is it? thanks louisben Edited By Louis Benjamin on 07/05/2009 17:48:30
-
Hi Tom, most of my packs are 4000 `s, although I have some 3300`s. What is the access like on the corsair if you were to convert to electric? I don`t want to have to remove the wing between flights to change packs...bit lazy. I found with the deuces wild that you can run through your packs pretty quick too. Lou
-
Hi. thanks for all your replies. Going down the electric route would mean the expense of buying more batteries, as all my packs are 3`s. So i fancy giving i/c a try. A few at the club seem to be in favour of petrol, lower running costs, easy starting and such. Is there a petrol engine suitable for the corsair? thanks lou
-
HI, I FLY ALL ELECTRIC MODELS AT PRESENT, AND HAVE VERY LIMITED EXPERIENCE WITH I/C. I`M INTERESTED IN GETTING THE HANGER9 CORSAIR.60 BUT I`M UNSURE WHAT ENGINE WOULD FIT BEST AND BE MOST SUITABLE FOR THIS MODEL ...4 STROKE OR 2 STROKE OR IS A PETROL AN OPTION? A SPECIFIC MAKE/MODEL WOULD BE APPRECIATED THANKS
-
HI, I AM CURRENTLY USING AN E-FLITE 25 BL ON A MODEL USING 3`S 4000MAH LIPO, AND A 12 X 8 APC. HACKER 70-SB PRO ESC. WHAT WOULD BE THE DIFFERENCE IN PERFORMANCE IF I WERE TO USE AN E-FLITE 32 BL OR EQUIVALENT(TORNADO THUMPER 4250) BUT STILL USED THE 3`S INSTEAD OF 4`S? THANKS
-
The November Grand Prize Draw
Louis Benjamin replied to David Ashby - Moderator's topic in All Things Model Flying
pick me!!.....pick me!! -
Brushless equivalent
Louis Benjamin replied to Louis Benjamin's topic in General Electric Flight Chat
yes...i`m using 3300Mah 3`s. what prop do you suggest? 12 x 8? I`ve fitted thin profile 51mm wheels that fit into the spats......with a little trimming, they should be fine. -
thanks for that mike, i`ll try it as soon as i get it installed louis
