Peter Roberts Posted November 9, 2007 Share Posted November 9, 2007 This is really Helpful. Can you give any guidance about the connectors - you said multiplex fro the batteries - what about the servos?Thanks for the pictures Quote Link to comment Share on other sites More sharing options...
Dave Allen Posted November 12, 2007 Share Posted November 12, 2007 Servo connections are standard....you need to remove the small lugs on the edge of the futaba leads as per normal, hitec and JR servo's plug right in.What you see in this pic is on the right of the powerbox are leads that go into the receiver, then the servo outputs for the main control surface servo's come out of the left (Top of powerbox). The two red leads go to Two external LED's which warn you if you have a problem with either power side.The two green plugs are from the power switches, of which you have Two. So you have one powerbox expert, 2 switches and 2 batteries....complete redundancy. Quote Link to comment Share on other sites More sharing options...
Peter Roberts Posted November 12, 2007 Author Share Posted November 12, 2007 Thanks Dave - light starting to dawn.Looks like my next solution!Many thanks. Peetr Quote Link to comment Share on other sites More sharing options...
Doug Ireland Posted November 13, 2007 Share Posted November 13, 2007 Just waiting to get home so I can install my one (work always gets in the way). Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.