Paul Holmes Posted November 16, 2007 Share Posted November 16, 2007 I am looking towards building a glider tug using a T240 and need some information regarding the tow release on the tug. Are there any commercially available fittings or do I need to fabricate one myself. If so, can someone give me some idea on what is needed. Regards. Quote Link to comment Share on other sites More sharing options...
Paul Holmes Posted November 17, 2007 Author Share Posted November 17, 2007 Hi JetsomeI was hoping to fit the largest motor that the model would take. That was going to be my next question. Has anybody got any ideas as to what would be a suitable size of motor for this model to do aero towing with? Quote Link to comment Share on other sites More sharing options...
Bill Wilkinson Posted January 3, 2008 Share Posted January 3, 2008 Regarding a toe release. Stuart Mackay provided a commercial one to me for a Wilga some time ago. It was relatively easy to install and operate. You could give him a call and see if they are still available. Quote Link to comment Share on other sites More sharing options...
Phil Claridge Posted January 5, 2008 Share Posted January 5, 2008 hi paul ihave a t240 running a kalt 22cc petrol engine .i have seen one flying with a z38 bags of power i havent tried it as a tug yet.using the flaps if fitted in a stiff wind you can almost hoverand land at walking pace Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.