Mark Thomas Posted March 1, 2008 Share Posted March 1, 2008 Just progressed from a Blade CX2 to the above mentioned heli, (still leraning) and it seemed a good next step.Start it all up, and I get the servos settled, but only a red light on the box, and then a servo chatters, but it seems to fly ok, I have no experience what so ever, and as such havent flown it since, its still in one piece brannd new, any ideas if its okay to fly? Quote Link to comment Share on other sites More sharing options...
Jonathan Lewzey Posted March 2, 2008 Share Posted March 2, 2008 I have 2 RTF helis (Twister Bell 47 and ESKy CP2) which both show the red light on the 4 in 1 unit while flying for about 50% of the flight. It seems to depend on throttle usage and serves as overload warning. I've not had any probs with the TB 47 (200+ flights now!) So if the model is properly trimmed, takes off at approapriate throttle level (ie not full) then I would say its fine. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.