Bandit Posted November 9, 2013 Share Posted November 9, 2013 Hi I have/had one of those three bolt hole prop adaptors, the type that bolt up to the motor instead of tightening down onto the shaft. The motor has a short shaft so I either change the shaft or find another adaptor but finding an adaptor seems to be a problem as the motor 3536 800kV doesn't seem to have any website I can say with conviction the adaptor will fit. I may be being daft but does anyone know where to get an adaptor? The ones I have seen seem to be a bit expensive too. That'll teach me for being inverted 4 foot off the ground and loosing my brain for a few seconds Quote Link to comment Share on other sites More sharing options...
Dylan Reynolds LaserCraft Services Posted November 9, 2013 Share Posted November 9, 2013 Hi Bandit We could do with a bit more information, what make is the motor, if its a generic motor that came in an artf what make and model was the plane? Quote Link to comment Share on other sites More sharing options...
WolstonFlyer Posted November 9, 2013 Share Posted November 9, 2013 Have a look on Hobbyking for a 'NTM PROP DRIVE 35 Series Accessory Pack'This is a 3 hole prop driver and might be what you need?***Link*** Quote Link to comment Share on other sites More sharing options...
Bandit Posted November 9, 2013 Author Share Posted November 9, 2013 Yes that's the one but was thinking I didn't need the whole pack. Quote Link to comment Share on other sites More sharing options...
Pete B Posted November 9, 2013 Share Posted November 9, 2013 At c.£1.26 for the pack I don't think you should feel too guilty about spending rashly, Bandit......you could probably Ebay the X-mount for a quid.... Pete Quote Link to comment Share on other sites More sharing options...
Depron Daz Posted November 9, 2013 Share Posted November 9, 2013 Posted by WolstonFlyer on 09/11/2013 11:36:26: Have a look on Hobbyking for a 'NTM PROP DRIVE 35 Series Accessory Pack' This is a 3 hole prop driver and might be what you need? ***Link*** I've used these on my current Valliant build, and they are good quality, especially for the price, available from their UK warehouse too. Quote Link to comment Share on other sites More sharing options...
Bandit Posted November 11, 2013 Author Share Posted November 11, 2013 Yeah at £1.26 I think I cannot complain Thanks guys. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.