Ben M Posted March 24, 2014 Share Posted March 24, 2014 Hi all, I am assembling my first helicopter (Align TRex 450L Dominator 3S) and my knowledge about electronics is very limited. After studying how to wire the components there are some connections where I am not completely sure. I have read that a wrong wiring may cause damage to the equipment so I would like to make sure before providing the power. The components I am talking about are: Receiver (Spektrum AR8000) Flybarless system (BeasX Microbeast V3) ESC (ALIGN RCE-BL45X, DC Input 2S-6S 45A, BEC Output 5-6V 3A) Servos (3 x ALIGN DS416M and 1 x ALIGN DS525M) The wiring schema I have come across with my research is: I would appreciate if somebody has connected these components before and can confirm that my schema is correct. Thanks in advance. Ben Quote Link to comment Share on other sites More sharing options...
Ben M Posted July 8, 2014 Author Share Posted July 8, 2014 Hi,After having tested this schema I can confirm it works.I hope this helps somebody else.Ben Quote Link to comment Share on other sites More sharing options...
mark bullement Posted July 8, 2014 Share Posted July 8, 2014 hi ben that's a good help to me iv bin looking all over the place for that have you flown it yet if so how did you find it ? Quote Link to comment Share on other sites More sharing options...
Ben M Posted July 9, 2014 Author Share Posted July 9, 2014 Hi Mark,Yes I did. It is amazing. I found it easier than the helis on the simulator and easier than a little Blade Nano I also own.The first day I flew it I had some waging (it was very windy). After I found the right trail servo gain setting, by the second flying day, it was flying stable as a rock even with wind.Well, I must say that my flying style is very basic as I am learning and also I am working on finding the right settings for the heli and me.I hope this helps.Ben Quote Link to comment Share on other sites More sharing options...
mark bullement Posted July 10, 2014 Share Posted July 10, 2014 Hi Ben I'm glad you have got it working iv have a few failed attempts at fbl heads reading your post it has inspired me to give it another go happy flying Quote Link to comment Share on other sites More sharing options...
Ben M Posted July 10, 2014 Author Share Posted July 10, 2014 Glad to read it, Mark.Let me know how it goes.Good luck! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.