jon nash Posted September 6, 2015 Share Posted September 6, 2015 hello I have dx6 and rx for multiplex fun sport. my question is it ok to have an permanent extension lead from the bind plug? it says ok in manual from multiplex so you don't have the hassle of removing wings and have easy access in the battery compartment .cheers jon Quote Link to comment Share on other sites More sharing options...
adrian lawrence 1 Posted September 6, 2015 Share Posted September 6, 2015 Hi Jon, yes it's fine to do so, it's something I do myself. Cheers Adrian Quote Link to comment Share on other sites More sharing options...
Shaunie Posted September 6, 2015 Share Posted September 6, 2015 On one occasion I used a battery switch harness as I wasn't using an ESC with a built in BEC. Some switch harnesses support the bind feature allowing a bind plug to go into the charging socket. For some reason when I plugged the switch harness in the receiver stuck in bind mode. not sure how I resolved it in the end, can't remember if the harness had a fault or whether the lead was picking up an unwanted signal. The short answer is try it you should be OK. Shaunie. Quote Link to comment Share on other sites More sharing options...
jon nash Posted September 6, 2015 Author Share Posted September 6, 2015 ok thank you Adrian and shaunie .cheers jon Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.