Craig Kane Posted June 30, 2017 Share Posted June 30, 2017 Guys, is it possible to link a 9XD (master) to a Turnigy 9XR Pro (slave) via a buddy-box lead? Both Tx's are running the same version of Open Tx 2.1. I can't seem to make it work at all. Any help would be appreciated. Quote Link to comment Share on other sites More sharing options...
flight1 Posted June 30, 2017 Share Posted June 30, 2017 Hi have you set the right modes "Master" on the Taranis and "Slave" on the 9XR. It's down toward the bottom on the same page with the RF module settings. and also set a switch to operate as it wont fuction corectly , also the planes reciever need to be bound and set up on the taranis first . if you not already done have you enabled which channels to use from the slave Tx on the taraNIS traner set up page? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.