Dave Hess Posted August 14, 2018 Share Posted August 14, 2018 My Taranis Q X7S arrived today. It was pretty well packed, but when I got it out of the case, i could see that both of the front long toggle switches were broken off. AFAICS, they rest against the top of the case, so any pressure on it will cause them to snap. Has anybody else had a problem with these or was I just unlucky? I saw one review where a guy cut them down to a shorter length, but I guess that would invalidate any warranty. Quote Link to comment Share on other sites More sharing options...
andyh Posted August 14, 2018 Share Posted August 14, 2018 if it's arrived faulty/damaged (I'm assuming you've bought it new from T9 or similar), then contact the seller & get it replaced, don't try to fix it yourself. Quote Link to comment Share on other sites More sharing options...
Dave Hess Posted August 14, 2018 Author Share Posted August 14, 2018 Yes, I bought it new, and yes I've sent it back. I'm just saying that these switches look dodgy. I'm worried that the same will happen again. Surely other people must have broken them too. Would anybody with the same transmitter like to comment? Quote Link to comment Share on other sites More sharing options...
trebor Posted August 15, 2018 Share Posted August 15, 2018 The X10 is a bit like that, mine had a bit of foam over the switches that doesn't do a lot. For the sake of an extra 10mm more space it's poorly thought out. I would have got the alloy case for it but £50 !!! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.