Allan Bennett Posted March 20 Share Posted March 20 I've just taken delivery of a Matek M10Q-3100 GPS/compass module, but I don't see the GND/+v/Tx/Rx/SLC/SDA connections that I'm used to. Instead there's a 4-pin socket (with plug and lead supplied) labelled G/C-L/C-H/5V, and 6 solder pads labelled Rx2/Tx2/5V/G/swd/swc. Looks like the 6 solder pads are what I need, but am I safe to assume that swd and swc are the compass connections normally referred to as SLC and SDA? Quote Link to comment Share on other sites More sharing options...
Allan Bennett Posted March 21 Author Share Posted March 21 Unfortunately I've been advised by the vendor that this is a 'CAN' device rather than an 'I2C' device, so can't be connected to my 'regular' FC. Quote Link to comment Share on other sites More sharing options...
Allan Bennett Posted March 22 Author Share Posted March 22 First-class service from Unmannedtech! They've sent me a returns label and will give me a refund., even though it was my mistake to order it. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.