Alex Leigh Posted July 8, 2009 Share Posted July 8, 2009 Couldn't find anything on the web. Seems easy to change the software, but nothing in the manual on how to do the stuff inside the tx. Anyone done it or have a web link showing it? Ta. Quote Link to comment Share on other sites More sharing options...
Doug Ireland Posted July 8, 2009 Share Posted July 8, 2009 Hi Alex, I have one of these radios and if you bought yours new there should be a flat spring thing that came with it. If you take the back off the Tx and move the throttle stick you should see/hear where the ratchet affects the movement. simply remove the ratchet and swap it with the one on the opposite stick. Job done! Have a look at pages 9 and 19 of the manual. edit: Just had a rethink. You will need that other flat spring thing as this is the tension adjustment . Edited By Doug Ireland on 08/07/2009 11:14:40 Edited By Doug Ireland on 08/07/2009 11:16:50 Quote Link to comment Share on other sites More sharing options...
Alex Leigh Posted July 8, 2009 Author Share Posted July 8, 2009 THanks Doug. Found the picture of the internals so I know where the tension screws are. Still trying to work out where the ratchet is. No picture of that. I shall have another look when I get a minute. Quote Link to comment Share on other sites More sharing options...
Doug Ireland Posted July 8, 2009 Share Posted July 8, 2009 Once you get the back off you will see it easily. Quote Link to comment Share on other sites More sharing options...
Tim Mackey Posted July 8, 2009 Share Posted July 8, 2009 I think you will find the ratchet pawl as such is actaully part of the quadrant of the stick assembly itself, as Doug syas, should be quite obvious once you start taking it to bits - watch out for tiny screws and springs flying off and getting lost. Quote Link to comment Share on other sites More sharing options...
Alex Leigh Posted July 8, 2009 Author Share Posted July 8, 2009 Sorted. Ta! Those springs were something special Right just need to swap a spare futaba charger over and I'm good to go. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.