Garry Pollard Posted December 29, 2009 Share Posted December 29, 2009 Hi Lads Just got DX7 and put it on charge. When full, what reading should it show on the display. I have serched the manual and cant find any reference to full battery voltage Thanks Garry Quote Link to comment Share on other sites More sharing options...
Tim Mackey Posted December 29, 2009 Share Posted December 29, 2009 What type of batteries ?Edited By Timbo - Administrator on 29/12/2009 19:35:00 Quote Link to comment Share on other sites More sharing options...
Garry Pollard Posted December 29, 2009 Author Share Posted December 29, 2009 The battery or lipo, not had it out, in the back of the TX which powers the transmitter Garry Quote Link to comment Share on other sites More sharing options...
Tim Mackey Posted December 29, 2009 Share Posted December 29, 2009 Ok assuming its "normal" with an 8 cell nimh pack, the instructions state Daily Flight Checks1. Check the battery voltage on both the transmitter and the receiver battery packs. Do not fly below 9.0V on the transmitter or below 4.7V on the receiver. To do so can crash your aircraft. Fresh off the cooker, the pack should read around 12V or so. Edited By Timbo - Administrator on 29/12/2009 19:34:23 Quote Link to comment Share on other sites More sharing options...
Garry Pollard Posted December 29, 2009 Author Share Posted December 29, 2009 Thanks for that Timbo. Only need TX as am all electric. No doubt one day someone will teach me to read Garry Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.