John Lewnes

No extra weight was required, it balanced perfectly. Regards

I built one of these some years ago, it took ages. I cant offer any tips on the build only to say get the wing incidences absolutely correct or you will have problems getting the wing struts to fit properly. there isnt much room for "adjustment" once the strut connections are glued into the wings. I fitted an OS 52 4 stoke in mine and there was bags of power. I think an Enya 60 would be about right. Best of look with the build. you will be well rewarded with a fine flying model. Regards, John

anyone tried their 2.4 ghz modules and 8 channel receivers yet?. At £40 they seem very cheap?????

Problem solved!, no valve  clearance on inlet valve, just a few thou did the trick.Gratefull thanks to all who responded. John

thanks for your interest, no. its not new, allegedly run only a few times. It certainly looks as though it has had little use with plenty of compression etc.

No, supposedly run for only a few times.It certainly looks almost new, plenty of compression etc. Thanks for the interest.

Hi, Just purchased an SC 30 4 stroke and it will only run backwards. I have been using an electric starter (rotating the correct way) but it refuses to run correctly.It starts easily enough and runs and idles beautifuly, but the wrong way!. Anyone got a bright idea?. Thanks, John

I see that Corona are now marketing a 2.4ghz module. At less than £50, including an 8 channel Rx. it seems too good to be true. Anyone out there has any experience?

Well done Clive, must be me next then!

Hope santa can get it down the chimney