WILLIAM Bunyan

Terry thanks for the reply .I was beginning to think I was alone with these problems. Your remedy is what I had decided to do and also I wasn't too keen on the up-elevator  wire rubbing on the top of the tailplane so I've raised the outlet from the fuselage of the up elevator wire. Bunny Bunyan

Well I assume from the deafening silence,that I was alone in having the problem with the former size! I have reached the point of fitting the control wires after having fitted the infill on the Port side when of course it's required on the Starboard  and it appears to me that the up elevator wire will prevent full deflection of the rudder. Is this so and has anybody else had a problem? Bunny Bunyan

I know it's a bit late but I've found that when I built the pylon the motor box appeared to be about 4mm narrower than the former P1  This would make fitting the Motor mount rather difficult.  The box can't be tapered as the build instructions specifically state ensure formers P 2&3 are vertical to the side. What am I missing? Bunny Bunyan !

I won't be sold a Pup!

I need re-training just the thing!