Jump to content
Please be aware of scammers when using the Sale/Wanted forum areas

crispin church

Members
 View Profile  See their activity

  • Posts

    544

  • Joined

  • Last visited

 Content Type 

Everything posted by crispin church

  1. crispin church
    filter fuel when filling up the tank if your engine putting crap into the pressure line then dont use one and rich the carb to make up for less pressure the more cuts on the fuel lines the more places to cause trouble
  2. crispin church
    Many thanks for all replys it bent and a twist in it and does affect flying a lot i am now at the stage that cover is coming off one side so will have more detailed look at it and put your comments in to good use
  3. crispin church
    got a built up balsa aileron thats bent tried reshinking and iron and clamp it between 2 boards am i chasing a loosing battle ?
  4. crispin church
    ok why double post    Edited By crispin church on 03/04/2013 14:38:04
  5. crispin church
    derek i sent you a message
  6. crispin church
    double post ? lol put more photos in a album Edited By crispin church on 02/04/2013 17:32:42 Edited By crispin church on 02/04/2013 17:33:47
  7. crispin church
    made one out of chipboard and pound shop sander a few months ago works great even tho its looks shite
  8. crispin church

    crispin church posted a gallery image in Member Albums

  9. crispin church
    pound shop sander with ply runners hot glued on
  10. crispin church

    crispin church posted a gallery image in Member Albums

  11. crispin church

    crispin church posted a gallery image in Member Albums

  12. crispin church
    which switch?
  13. crispin church
    yer that will work like others are saying cover the connectors in some way i use PC power surply for last 4 years with 2 lipo chargers you can get 12 and 5 volt out puts on a PC surply
  14. crispin church
    take it you taken out the red wire on 2 becs so they not fighting each other could be taking voltage from flight time
  15. crispin church
    after you lost signal did you check wires and rx before picking up the pieces when you say battery fine in what way? do a full range check not just tx on low power see how far it goes rx mounting is the wires outside fuse or inside and what is it made of you dont really give much details i had one plane that had metal type look covering and only got half range until i put rx wires outside fuse
  16. crispin church
    http://www.modelflying.co.uk/forums/postings.asp?th=52962 all you need to know
  17. crispin church
    poundland 5 min and 30 minute is quite good if you use a heat gun to warm it up a little so its nice and thin mixes a lot better
  18. crispin church
    on a gws 10x6 2 blade prop 17mph winds dont mix
  19. crispin church
    on a gws 10x6 blade it dont like 17mph wind backwards only
  20. crispin church
    Thank you all for comments and all taken on board you learn at lot on this thread
  21. crispin church
    http://www.technobotsonline.com/igus-efsm-06-4-hole-flange-bearing-6mm-bore.html would a pair of these be any good on the hub ?
  22. crispin church
    if you got mixes on your tx r to a 100% on your 3 channel then it will be on both sticks
  23. crispin church
    i keep mine fully charged all time sometimes i dont fly for month and mine have been good for five years a few of them just balance each time so you know there no high cells
  24. crispin church
    you can plug sat rx from AR6200 spektrum the orange RX is good even with small glow engines
  25. crispin church
      on this twin got springy wheel arms that are rubbish on thick grass noses over easy someone said keep the tail down will help ? or i change for fixed metal like on a cap but this would be a lot of work in the wing any ideas please   Edited By Biggles' Elder Brother - Moderator on 15/03/2013 21:14:05
×
×
  • Create New...