Arron Davison
Members-
Posts
87 -
Joined
-
Last visited
Never
Content Type
Profiles
Forums
Blogs
Gallery
Calendar
Downloads
Everything posted by Arron Davison
-
Flair Junior 60 Build
Arron Davison replied to Arron Davison's topic in Building from Traditional Kits and Plans
Hi Pat, That is perfect thank you. The question i have is why is the cut so deep for the 1/4 spars and dihedral braces? As you can see from yours they are not flush to the bottom surface? This is what i was worried about do i glue them all the way in like yours? -
Flair Junior 60 Build
Arron Davison replied to Arron Davison's topic in Building from Traditional Kits and Plans
Are the spars still 1/4 X 1/4 as the pre cut slots are a lot deeper! I have taken photos but do not no how to up load them? -
Hi guys Need some help please I am building the above got to the centre wing section plans and instructions go a little vague here!
-
Thank you Alan That is great advice! Much appreciated.
-
Posted by Jon Harper - Laser Engines on 24/08/2017 15:31:48: Posted by David Ovenden on 24/08/2017 15:26:19: Arron, I think the Ziroli P-38 is 114" span and weighs in at around 40lbs. So it will need engines around 50cc or 3cu.in (300 size 4-stroke) Jon - Maybe it would suit two laser 300V twin 4-strokes; what do you think? Yes 300 or 360. We have had someone do this but i cant remember who. In any case it didnt end well as the tail departed in flight. I think he built another and it suffered the same fate Was this due to vibration?
-
That is the model i am talking about 114" I like the look of the 300V 4 stroke very nice!
-
It is for the Nick Ziroli, Lockheed P-38 Lightning. Power required 38 - 52 i take it that this is 2stroke?
-
Good afternoon all, I have a question when sizing engines from 2stroke to 4stroke how much more do you allow for 4stroke? Say a size 52 2stroke would be a ?? 4stroke?
-
Left wing complete. I think? are the top and bottom of the wing tip sanded and formed enough??? And the start of the right wing. Any advise welcome on the finish of the left wing.
-
Edited By Arron Davison on 21/10/2012 17:05:38 Edited By Chris Bott - Moderator on 21/10/2012 19:56:14
-
A little update. I have jacked up the front and rear spars glued everything in place built and attached the tip put in the vertical grain struts just got to put on the 1/16 leading edge covering and the left wing is complete looking good will post some more pictures soon.
-
I havnt deleted any pictures??? Strange???
-
I dont no whats happened to my pictures?? any ideas???