Jump to content
Please be aware of scammers when using the Sale/Wanted forum areas

Jose L. G.

Members
 View Profile  See their activity

  • Posts

    417

  • Joined

  • Last visited

 Content Type 

Everything posted by Jose L. G.

  1. Jose L. G.
    Thanks Danny. A little more progress. I built the leading edge of the ailerons a bit diferent to Danny`s. I put a plastic tube for the wire, glued a 1/16" balsa supporting it and capped the leading-edge with balsa and sanded flush top and bottom. Later sanded the front end to fix in the wing recess. When I began the biuld of the plane I began with the tail feathers ..... I decided to use "Robart" style hinges but didn`t manage to align the holes so I put apart and filled the holes with balsa stick. Now I dusted the parts and made new holes that linned this time. So once did I profiled the fin and rudder. In the stab/elevator I redid the holes, put the hinges and made the elevator horn. Really a hard time (Due to my eysight problems...). Made the channel for the wire and finish adjusting the wire. Onece satisfied I glued it with 30 minutes epoxy and microballons. Today fixed the front ply and drawed the profilling lines in the "ribs". Prepared the cross bars for the rudder and elevator wires.... Until next. José Luis Edited By Jose L. G. on 09/06/2020 11:03:26
  2. Jose L. G.

    Jose L. G. posted a gallery image in Member Albums

  3. Jose L. G.

    Jose L. G. posted a gallery image in Member Albums

  4. Jose L. G.

    Jose L. G. posted a gallery image in Member Albums

  5. Jose L. G.

    Jose L. G. posted a gallery image in Member Albums

  6. Jose L. G.
    WooH Danny. Good progress. I've dooing very little on mine the past weel. Hope to do some progress this one. Cheers. José L.
  7. Jose L. G.
    Hi Fellow Furymites.. A bit of progress. Not much really. Glued the ply blocks to the aileron servo plates..... Glued some 1/64 plywood to the front of F1, for having a hard point to sand to and fix the carbon cow. Also glassed the center part of the fuse. Applied some peel-ply. Yesterday I Skinned this wiyh aluminium foil, removed it today because not satissfied as is was a bit shot of width. Today replaced the shrod of the right panel as it was bad positioned. Until next. José Luis
  8. Jose L. G.

    New shroud

    Jose L. G. posted a gallery image in Member Albums

    New shroud
  9. Jose L. G.
    ply reinforcement F1
  10. Jose L. G.

    servos

    Jose L. G. posted a gallery image in Member Albums

    servos
  11. Jose L. G.
    fiberglassing center
  12. Jose L. G.

    Aileron servo plate

    Jose L. G. posted a gallery image in Member Albums

    Aileron servo plate
  13. Jose L. G.
    Me too, Danny. After the situation on the center panel I get distracted with other things. I finished the aileron area sheeting all over, much easy that put capstrips- Also added some ply to support and screw the covers with the servos. So after some mental relax I went for the infamous center panel. I checked the panel againts the plan and the structure to set the angle of the wing. As you can see the ploblem is in the tail of the ribs. As the center ribs are full, not sections the problem is in the outboard ribs. So I cut the tails free of the second spar (The top capstrip remain uncut) and reglue them with plenty of weight. This solved the problem in a 99 percent. () A this moment I glued the rails for the elevator and rudder servos. The servos are Futaba 3150 digis. Cheers. José Luis. Edited By Jose L. G. on 25/05/2020 09:59:29
  14. Jose L. G.
    Looking good Danny. The logo in the tail is in the pics you loaded for all of us....... Cheers. José L.
  15. Jose L. G.

    Jose L. G. posted a gallery image in Member Albums

  16. Jose L. G.

    Jose L. G. posted a gallery image in Member Albums

  17. Jose L. G.

    Jose L. G. posted a gallery image in Member Albums

  18. Jose L. G.

    Jose L. G. posted a gallery image in Member Albums

  19. Jose L. G.

    Jose L. G. posted a gallery image in Member Albums

  20. Jose L. G.

    Jose L. G. posted a gallery image in Member Albums

  21. Jose L. G.
    Hi Fury followers. Thanks Eric. Not so Tidy () The past week I`d been doing other things. Un fortunatelly I glued the fiberglass hings in the wing. But when I offered the ailerons these were about six mm out of the trailing edge. So with a X-Acto blade sliced over the side of each hinge to free them. It took a lot of patience. Now more or less resolved. I haven´t glued it yet. I have to figure a few things.... When assembling the three panels I broke a few things and had to reglue them. But that wasn´t all the things that will appear. The trailing edge don`t align. I dont know what happened. Need to recheck before solver the problemm. I take a change of mind and looked to the servo installatios in the fuse and wing. I+m planning on using pull-pull for the rudder and elevator. The servos will be in the area of the detachable part of the fuse and the crossbar in the cockpit area. For the ailerons I`d made a ply plate. The servo will be screwed to a pair of blocks and the plate screwed to the wing. Well. I have a lot of things to solve for now on. Cheers. José Luis
  22. Jose L. G.
    Beautiful work Danny. Mine will be a "comical" reproduction of that. José Luis
  23. Jose L. G.

    Jose L. G. posted a gallery image in Member Albums

  24. Jose L. G.

    Jose L. G. posted a gallery image in Member Albums

  25. Jose L. G.

    Jose L. G. posted a gallery image in Member Albums

×
×
  • Create New...