Jump to content
Please be aware of scammers when using the Sale/Wanted forum areas

Jose L. G.

Members
 View Profile  See their activity

  • Posts

    417

  • Joined

  • Last visited

 Content Type 

Everything posted by Jose L. G.

  1. Jose L. G.

    Center section_2

    Jose L. G. posted a gallery image in Member Albums

    Center section_2
  2. Jose L. G.

    Center section_1

    Jose L. G. posted a gallery image in Member Albums

    Center section_1
  3. Jose L. G.
    Hi Danny. About "latex gloves". The latex is permeable (lets pass throught) to solvens and chemicals. That`s the reson that they recomends barrier creams with latex gloves. The vinyl and nitrile gloves are not permeble to solvens and chemicals so are better for use with epoxi r/ polyester resins. Using the correct protection in neccesary for avoiding alergic reactions. José Luis
  4. Jose L. G.
    Hi Danny. I`m still in the background. My Fury is still missing the top wing. My eysight is not better tan before, so I have serious problems but decided to finish it. Probably I resume building next january. I know the feeling when no one make comments on your own thread. I few years back I made a "Panther" autogiro designed by Richard Harris and didn`t received nil comments. I`ve seen your videos on tissue covering, as has passed a long time when I used this technique. Also I`ve seen your video on fiberglassing and peel-ply application. Very entertaining. In the recpect I`d seen that you use latex gloves and these are no recommended actually, Better use the vinyl or nitrile variety. Still pending to see the foil covering video. Also I`ve suscribed tou your channel. Please keep coming. Best Regards José Luis Spain. (now rainy)
  5. Jose L. G.
    Hi Danny. Still around the fórum. ou can clean the CA spillage with acetone. Not dispose of the scissors,.... Cheers, José Luis
  6. Jose L. G.
    Fantastic work Tonny ¡ What type of glue had you used for attaching the paper? I suppouse must be compatible with the depron you had used in the model. At the moment I`d been unable to source some dope in my side of europe (restrictios on shipping). I ordered some from Retromodeller but cancelled the order due shipping restrictions. José Luis
  7. Jose L. G.
    Nice work Danny ! I´ve used the RDS system in my competition/Composite gliders. Not in scale subjecs. Recently I don´t have more RDS sets, so I am not able to use it again. I`ll have to think about amini Lathe. Ummm. I bought a few RDS sets for Futaba servos. Now I have no more in stock. Jose Luis
  8. Jose L. G.
    Hi guys. Ab initio I used the F6, as drawn on the plan, and sheeted the sides. with the bulged sides. After discussing the wrong shape of the fuse I`d cut the sheeting at the line of the side door. Installed the new F6 as drawn by Danny, and fixed the new sheeting. José Luis
  9. Jose L. G.
    Good afternoon guys ! Now I'm recovering from surgery on my left eye. Also they put inside some product yo cure the injuries that initiated the Lost of eyesight. So probably Next weekend I'll be back with my Fury's. Hi Ernie I"m interested in the masking templates for K3736. Good winds my friends.
  10. Jose L. G.
    Hi Jim. I`m sorry for my delay on answering your question. Well, the modell is not ready for covering yet. The sad info it`s that I Will be unable to finish it. I have to quit any type on modelling, Reading, writting, …. On December 18th I suffered the lost of almost all the eyesight in my left eye (the good one). I now see really bad. The image is crushed, tilted and a missing área. Really dissaponting. I Will try to follow the others progrees . As anote have finished the moild for the cowl and after waxing it last monday I layup a first cowl. I`ll open the mould toorrow. Vheers. José Luis
  11. Jose L. G.
    Hi Ernie. Checking the Wesburg Drawings tell that the dihedral of the top wing is 1 degree. Cheers. José Luis Edited By Jose L. G. on 20/12/2018 17:17:28
  12. Jose L. G.
    Progress…. Added the bottom sheet of the nose Hatch. Once glassedI`ll cut the Hatch. Also made a few detail work on the wing pockets for the archor plates of the center panel. Added the missing sheet on the bottom of the center panel. Today carved and glued the foam blocks on the bottom of the nose. As I understand The sheeting finish at the front landing gear wire, behind is covered by the radiator. (??) Tomorrow Will sand the foam blocks to shape. Also working in the mould of the cowl. The plug is finished and I`d applied a few coats of release agent (wax&hellip I`ll Split the mould on a top/bottom plan, so I`d made a parting board of melamine chipboard. Also drilled 3 holes for the keys of both parts. I use Steel balls. The parting board and balls are being waxed. Cheers. José Luis
  13. Jose L. G.

    Jose L. G. posted a gallery image in Member Albums

  14. Jose L. G.

    Jose L. G. posted a gallery image in Member Albums

  15. Jose L. G.

    Jose L. G. posted a gallery image in Member Albums

  16. Jose L. G.

    Jose L. G. posted a gallery image in Member Albums

  17. Jose L. G.
    Hi Guys. Progress of the last days. After gluing the ply supports for the struts added the remaining capstrips. Also added the leading Edge strips. Today shaped the leading Edge strips. First used arazor plane, next a sanding block. Also sanded the top trailing Edge strip and faired the wingtip. Stilla bit of sanding to do. Next work is to finish the bottom of the nose. Checking the plan I noted that the block of balsa has no use because the bottom must be more or less 1/8" thick. I am going to makea bottom Hatch so I glued some 1/4" triangle around the bottom. Prepared a plyt cover with balsa. Now drying. Tomorrow I`ll cut the Hatch and glue in situ. Next I`ll add the side cheeks with blue foam. Till next. José Luis
  18. Jose L. G.

    Jose L. G. posted a gallery image in Member Albums

  19. Jose L. G.

    Jose L. G. posted a gallery image in Member Albums

  20. Jose L. G.

    Jose L. G. posted a gallery image in Member Albums

  21. Jose L. G.

    Jose L. G. posted a gallery image in Member Albums

  22. Jose L. G.
    Thanks Danny. You too ¡ Completed all the capstrips on the bottom panels except the top of the ribs that support the struts. Bottom capstrips. Top of wings. Also debur the brass parts and filled the top edges for avoiding cutting the thread. Fixed the brass parts with epoxi, tied with kevlar and fixed with glue. also added some balsa to fill the space betwen the ply and the spar. Need a bit of shapping. Will continue. José Luis
  23. Jose L. G.

    Jose L. G. posted a gallery image in Member Albums

  24. Jose L. G.

    Jose L. G. posted a gallery image in Member Albums

  25. Jose L. G.

    Jose L. G. posted a gallery image in Member Albums

×
×
  • Create New...