Paul McCaughey

Andy, those 2 models might be of interest. Drop me a message with some details. Are there any details of the mig 29 anywhere? Would be nice to see the build/ finished article.

Hi Phil, Thanks for the info. I did look at the pssa site but found that most of the suppliers listed don't produce kits anymore. The mass build of the a4 being Feb probably cuts down the time I will have to do it. Was hoping to pick something up pre Christmas. Looks like a conversion or the Vulcan might be a good idea. Ripmax kits appear to be discontinued now. Best bet might be to find a flyer now and do the mass build late Feb. Just need to see what comes up in used market.

I have a foamy t-45 goshawk for lightweight pss but was looking to get something else for stronger winds. I stupidly never got my finger out when a new in the box island models aermacchi kit came up the other month. I mulled it over to long and it was gone. So I now have a few different thoughts on scratching the itch! - Does anyone know of any kits for sale? (not just island models or aermacchi) - Can anyone point me in the direction of any other suppliers of kits? I found a few but they look to be out of date/no longer operating. - Should I hold off and do the mass build of the a4 I spotted in a thread on here? - Should I get something RTF that just needs RX an battery putting in it? Does anyone have or know of any pss models for sale? thanks

Martyn, the motor magnets are likely lose through vibration or on the tape competition landings. epoxy is what they are stuck in with at the factory. keep an eye on them and inspect if any strange noises reappear. The maxon gear box is decent enough if kept below 400w. Had the detail explained by our expert up here with regards another gearbox similar to maxon. Apparently the front bearings won't last long if consistently above 400w. If you have further problems drop me a msg and i will pass on details for you to contact him. He repairs/supplies motors gearboxes for thermal soarers in the competition scene. The pulsar is a competition level model and if you check the new airframe price you will see why few are about in general circulation. They tend to stay in the hands of competition flyers who frequent more specialised forums. (barcs, esoaring, etc) Get some practice in and visit a comp. It's fun and one of the best challenges out there. As for gearbox grease, I am sure those that need greased use the white lithium grease.

If you want a new one then ebay.de is your best bet. They turn up occasionally and I wouldn't be surprised if someone makes a version as there are various new 'old' canopies available. this search should find you one. **LINK**

he could go smaller and use one of these 28mm units. **LINK** good luck, will keep an eye on this.

closest club would be dumbarton/ clyde valley / queens view. all over an hour away. model shops are thin on the ground. best option would be to call in advance and reserve stock/order items in. closest will be CMF hobbies/Uddingston models in Glasgow. Ayr model centre, scoonie hobbies and Marionville are the others likely to have what you want but will be 2hrs away. SAA should be able to advise if there are country members in the area you could meet up with. i suspect there will be an obliging local farmer/landowner. slope and waterplane flying sites should be easy. the only issue will be the saltwater on as it's mostly all sea lochs. loch awe and loch lomond are close enough. loch lomond will likely be more problematic trying to get a flying spot.

Looking for some more pointers... I have a v-tail glider with spoilers and motor. I have been trying to get this set up using plane and glider modes but can't seem to get what I want. I need rudder and the elevator on right stick. I need differential adjustment on the tail. I can get this if I set the wing as elevon in plane mode. If set up as v-tail I can't seem to get it. I also need motor and spoilers on throttle stick with the motor able to be turned off with a switch.

The last batch of p2k's took about 8weeks to be restocked in UK warehouse. I just missed them. The last batch that arrived in sold out within 4/5 days. Bixler2 has a similar restock and sales pattern as just got one of them for my nephew. The thing I can't understand is why if they know they sell out as quickly why they don't re-stock more. Seems the manufacturing times might be a hold up in getting stock out. Check the EU warehouse as shipping cost is OK from there.

speedster, that for your video it really helped figure out what i was doing with the glider programming! i have the motor working in the flight mode i want, it's assigned to the spoilers(aka throttle). i was hoping to program in a mix that will allow the motor to be killed from a different switch so it's not triggered accidentally or on the ground. any unused switch will do. i tried a few different mix methods but couldn't get it right. thanks

Hi, got my p2k glider mostly set up the way I want but can't figure out the mix I need to use to kill the motor from a switch. I have it operating in the right flight mode but want to asign a kill to flap or aux2 switch. Ta

Thanks for the reply keith, just to be clear you mean I should cover over the elevator as one piece per side so the covering acts as a hinge? The hinges installed are plastic pinned ones and some cash ones. Will give it a ttry one the tail and see how it goes. Got balsaloc from doing a similar job on the brother in laws plane last year.

i have been given 2 old slope soaring gliders that are serviceable but have been patched to hide various bit's of landing(& dog attack) damage. so the covering has seen better days. i am stripping the old covering from them both (easily the worst modelling task ever, especially on foam wings as there is more for it to stick to!) i am nearly finished stripping the first one after hours of work. i will then check the glue joints and repair any damage before recovering. the wings and tails are nicely hinged and i don' really want to split or redo the hinges as i won't make as good a job as what they are now. are there any tips or tricks i can utilise to recover these in place without resorting to removal?

I don't know what position it puts people in but if it was me i would contact citizens advice, the 'judge' column linked above (they deal in cunsumer rigjts casds and can probably advise bdat course of action.) and possibly a solicitor asap. I suspect you will be in one of the following positions; your goods are still in the possession of the owner and could be classed as 'assests' to be liquidated or your goods have been sold without you being paid so you are a creditor of the business. Quite frankly I am appalled that this hasn't been resolved one way or another.

Hi folks, this has hit the press. I would possibly try to give the press folks a shout as they might be able to arrange to get all items back. It was picked up by the judge column which focuses on consumer rights. Article here. **LINK**