Rob Dunn
-
Posts
172 -
Joined
-
Last visited
Never
Content Type
Profiles
Forums
Blogs
Gallery
Calendar
Downloads
Everything posted by Rob Dunn
-
She is starting to take shape
-
-
Finished for the night need a cuppa,Need to let the glue dry bottom formers in place and the wing saddle
-
-
Thats a very good idea Andy something to think about
-
Only done a small amount of work over the past 2 days was out flying yesterday couldn't stay in with the sun shining and very little wind. The stag and fin are now glued in place i must of spent at least an hour or two thinking about doing this the nerves where higher that a someone on drugs. With a bit of sanding some tape and a square, Following the instructions all worked out just fine Made some school boy error's with the balsa skins , with some filler and abit of sanding it will all work out just fine, He hopes
-
-
-
Thanks for the advice steve, I have decide to buy the 3m mask and another with replaceable filters to see which one i prefer, The one i dont like will do to the father as he is restoring an MGB GT so will not go th waste. Mowerman didn't i see you in a Batman film
-
Thanks Trevor, The booklet has some very good tips and ways of building, i am enjoying the build nice to just sit down a let the time go by
-
thanks for the repies will look at a mask with replacable filters in stead of the throw away types after one use.
-
I am getting into building from plans and kits and wondering what dusks mask members use and advice on getting one as I have noticed I am starting to suffers from the dust when sanding even when outside.
-
Thanks All, everything is coming together slowly PeterF I have heard that this plane is tail heavy the idea is to have the receiver unit and batteries in the nose area to take some of the weight from the wing and use it for balancing. One thing I did notice was the amount of balsa sheets in the box need some more glue
-
Started on the top part of the fuselage very easy to go together now for a cuppa will the glue dries
-
-
-
-
-
Absolutely beautiful coming on now you can see the plane take shape. I know it;s some way off but are you looking forward to the electronics insolation
-
I'am having a go at the top flite dc-3 kit, Doing a build log **LINK**
-
Manish i done a lot of research on the top flite dc-3 and the rcsale builder website is full of information on the dc-3 where people have done a build log **LINK** Edited By Rob Dunn on 28/10/2015 10:52:16
-
Fin and rudder completed just needs finaly sanding glad i done the scale rudder looks alot better
-
-
-
Finally finished the stab and elevators. Scale fin and rudder coming on nicely, Not as hard as it looks you do need to measure twice before cutting and take the time.
