Martin Rowe 1

Just seen what you said on the other thread

Sorry to bother again. Do you think a .4 2 stroke is too small?

That's genius, I love my taranis i will copy that idea!

How much elevator did you dial in at 50%flaps? And 100% i am using taranis as well is it easy to set it up on one of the twist pots?

Frustratingly I have a .4 ripmax two stroke brand new. I geuse I need to look out for a bigger unit. I am going IC with this one as I want the noise.

Would a .4 glow 2 stroke be too little?

Ye, thank you. I'll go for those

Whilst I have you attention is 0,61 2 stroke = around 20cc in petrol?

Thank you

Arr i see I used the wrong link I meant these http://www.banggood.com/EMAX-ES09MD-Digital-Swash-Servo-For-450-Helicopter-With-Metal-Gear-p-88192.html thanks,for your help, I am grateful

What did you guys think of the e max ones? I can get them from bang goodbang good

Ye I think mines the old version as it has no hatch to fit remove batteries. I looked at the servo shop, my problem being I have no idea how much torque or if I want digital or not. My head hurts

Wow at really was a good deal. i,am think elec one of these http://www.hobbyking.com/hobbyking/store/__19030__Turnigy_G60_Brushless_Outrunner_300kv_60_Glow_.html hk have three types 300kv 500kv 400kv, do you know what that means?

Do you mean these? http://www.ebay.co.uk/itm/like/281183804853?limghlpsr=true&hlpv=2&ops=true&viphx=1&hlpht=true&lpid=108&chn=ps&device=t&adtype=pla&crdt=0&ff3=1&ff11=ICEP3.0.0-L&ff12=67&ff13=80&ff14=108&ff19=0 do they do a metal version?

How about these? http://www.banggood.com/EMAX-ES09MD-Digital-Swash-Servo-For-450-Helicopter-With-Metal-Gear-p-88192.html i don't have a engine yet, I would really like a two cylinder but they cost...

Hi I am lucky enough to have got my hands on a blackhorse chipmunk. so I need some servos for it. Seven of them! It's a standard four channel plane with two aileron and two flaps. i would like metal geared servos. I am not sure if I want digital of not? The plane will weight 3.5 kg ish. whats everyone using?

Hi I have a storch that I am getting ready to fly. I need to replace the batter pack as it's got some damage. I would like to use a lipo. It it also has a remote glow to the laser engine, I may not use though Am I ok to replace with a 2s bat? What size do people use?

I put cork tiles on a mdf board, sorted.

Watching me small children yesterday morning. And watching my eloise open her birthday bike. We struggled to afford anything this Christmas but we saved really hard and got there. The wife cried. I'll never forget their faces. happiness

I have a carbon cub as well! It flys really well. I have 6s 4000 and 6s 5000. Both are fine don't really notice any changes due to the weight diferance.

Hi i am pleased to say it's fixed. The complete carb had rotated in the housing. This meant the push rod had a curve inn it and would not allow we the throttle to close up. Thanks everyone

handyman that makes complete sense. I will give it a shot.

Right I have the engine in a model. The throttle arm on the carb has a push rod attached. I have removed the push rod from the servo arm. I have done this so I can manually open and close the carb by moving the push rod. i believe it may be the idle screw that needs adjusting. After having someone else look. If I screw the knurled nob in it will close the carb? This would then decrease the idle? What I don't understand is if I set the gap to 1mm as the instructions as the link at the top says, how will I be able close the carb to stop the engine. thanks for the help and patience.

Being a beginner with my taranis could you explain how to update the sound pack?

Hit the life chat thing. They normally take 20 mins or so to answer but they have always fixed it for me.