Henri Squier
-
Posts
785 -
Joined
-
Last visited
Never
Content Type
Profiles
Forums
Blogs
Gallery
Calendar
Downloads
Everything posted by Henri Squier
-
-
Well ... feels the biggest part in behind. Up to me looks better than N°1. Things to do while waiting spring : electronics and (eventually) paint job. Thanks to all those who followed, henri
-
-
-
-
-
Antenna Position
Henri Squier replied to Henri Squier's topic in Aerial Photography, First Person View, UAVs
Thanks a lot Gonzo (sorry for delay), henri. -
Tail story ...
-
-
-
-
Nose story inside air intake Exhaust Result is a little below to what was expected. Curves appeared to be much more difficult to cover mostly on hard glassed surface. Anyway, initial project was not meant to be scale. Edited By Henri Squier on 18/01/2016 21:22:28
-
Congratulation, your very neat wood job is a pleasure to watch.
-
-
-
-
-
-
Antenna Position
Henri Squier replied to Henri Squier's topic in Aerial Photography, First Person View, UAVs
Hi, Thanks for answers. Sorry for lack of information : the plane is balsa trad build, 46 inches, will have undercarriage, radio Tx is 2.4 Ghz and video signal on 5.4 Ghz. ... and for GONZO I'll be happy with your offer, i'm not in any FPV forum and I'll be pleased if you can give me some good links. henri -
Hi everyone, Do you have some suggestion ? A ?, B ? C, D or E ? In other terms do I have to worry a "masking shield " from the LIPO / motor ?... or from the board cam ?... that will make me loose the video signal when I'm "behind" ? Could balsa wing also be a "shield" ? Or is this not a problem and it works whatever the position of the antenna ? Thanks for your wise thoughts, henri. Edited By Henri Squier on 06/01/2016 20:54:23
-
-
-
-
-
Polyurethane (D4 - bostik) works very well (for me). dries in 3 hours, and swallows when it dries (the more there is humidity the more it swallows) : can be a good thing for reinforcement or when there is not a perfect tight fit. Henri
