Gerry Stansfield
-
Posts
43 -
Joined
-
Last visited
Never
Gerry Stansfield's Achievements
0
Reputation
-
Gerry Stansfield joined the community
-
-
-
-
-
-
-
-
-
-
Slope sites
Gerry Stansfield replied to Gerry Stansfield's topic in Gliders and Gliding - General Discussion
I live near selby north yorkshire, are there any slope sites within a few miles of here?. -
Any slope sites in north yorkshire?.
-
Hi. JohnI have converted my ASP 52 4 stroke, and used Just Engines cdi unit, I had the same trouble with mine, cutting when fitting on cowl, I placed one of the fuel tank vent's near the carb intake to balance the pressure and it cured it! The filler pipe is blocked off when filled the main needle is set 3/4 of a turn from closed, [no pressure feed}, and it runs and start's super.no problems.Gerry. p,s.oil mix 20 to 1.
-
Duog, what sort of problems are you having with engine? GERRY.
-
Best of luck Doug, Carn't wait to fly mine, weather seems to be improving, so might get a flight soon, [fingers crossed}.P.S. Take it easy when drilling hole for magnet!.
-
Doug,The propdrive on mine has a groove turned in it. I managed to drill it by holding it in the benchdrill vice, and used a drill size same as magnet minus a couple of thou: pressed the magnet in to just below the surface of the propdriver and then filled the groove in with car body filler then smooth it down, theres no way it's going to come out, {mine hasn't} Brian,Im using 2 stroke oil, at 20 to 1, and there,s a slight residue out of the exhaust, so oil must be getting round. It's run for about an hour {on and off } up to now and nothings happened yet!!
