Alan Haines
-
Posts
14 -
Joined
-
Last visited
Content Type
Profiles
Forums
Blogs
Gallery
Calendar
Downloads
Everything posted by Alan Haines
-
Help on under/over aileron linkage
Alan Haines replied to Mike Chantler's topic in All Things Model Flying
Creating a jig to guide the hot wire removes almost all the hit and miss element. I heat the wire so that it's only just hot enough to melt about half an inch of foam at a time. Once done the hole can be lined with a drinking straw. AJH -
Junsi CellLog 8S and LogView charting software
Alan Haines replied to EvilC57's topic in Gadgets and Electronics
In case anyone is still interested, I can confirm that CellLog runs on Windows 10, at least it does on my PC. AJH -
Junsi CellLog 8S and LogView charting software
Alan Haines replied to EvilC57's topic in Gadgets and Electronics
Possibly not very helpful, but this might be an alternative: https://www.rcgroups.com/forums/showpost.php?p=13710575&postcount=180 It was intended to be simple rather than "highly developed" and I've never tried to run it on Windows10 but it doesn't do anything particularly version specific, so should be ok. I haven't used my CellLog since telemetry became a thing. AJH -
Fms alpha jet
Alan Haines replied to Barry Reeve's topic in Gliders and Gliding - General Discussion
Mine balances on my fingertips on the leading edge about an inch outboard of the saw tooth. AJH -
-
"We do need a circuit diagram for those of us who want to run higher power LED's" I know almost nothing about electronics so take my advice with a large pinch of salt.LED systems. For a neat ready made solution, look here: http://store.jdrones.com/jD_IOBoard_p/jdioboard11.htm I have used a few of these with no problems. For a home made solution, use a ULN2003A Darlington Array 7 NPN 500mA, for example: http://www.hobbytronics.co.uk/index.php?route=product/search&keyword=uln Hopefully, there's a picture nearby. AJH
-
-
-
-
-
-
-
-
